Siemens Washing Machine Error E08

⚡ Quick Answer: The Siemens Washing Machine E08 error indicates a motor-related fault, specifically an issue with the drain pump that prevents the unit from reaching ... ✅ DIY Fixable

What Does Error E08 Mean?

The Siemens Washing Machine E08 error indicates a motor-related fault, specifically an issue with the drain pump that prevents the unit from reaching or maintaining the correct spin speed. This results in the wash cycle stopping prematurely, the drum failing to spin at the expected speed, and the continuous display of the E08 error code. Users may experience water not draining properly, leading to incomplete cycles.

Common Symptoms:

  • Wash cycle stops before or during spin
  • Drum does not reach expected spin speed
  • Machine displays E08 and may not complete cycle

Possible Causes

  • Motor overload / speed control fault (medium)

How to Fix Error E08

DIY Fix Basic checks before service call

  1. Turn off and unplug the machine.
  2. Ensure the load is balanced and not overloaded.
  3. Check for obvious obstructions in drum or door seal.
  4. Restart and observe if error returns.

Technician Only Diagnose motor and spin control system

  1. Test drive motor and motor control board for faults.
  2. Check motor tachometer/speed sensor and wiring harness.
  3. Verify inverter/drive module functionality.
  4. Inspect drum bearings and belt tension (if applicable).

Parts needed: Drive motor, Motor control/inverter board, Speed sensor/tachometer, Wiring harness

🛑 When to Call a Pro:
  • Error persists after basic load and restart checks
  • Unusual noises from motor or drum
  • Water leakage detected concurrent with error

Technical Specifications

wattage 30W
component Drain Pump
resistance 30-50 ohms
part_number Siemens 00167443
voltage_rating 230V AC

Common Questions

What does E08 error mean on Siemens Washing Machine?

The E08 error signifies a motor-related fault, preventing the machine from achieving the correct spin speed.

Can I fix Siemens Washing Machine E08 error myself?

Yes, you can perform basic checks like ensuring the load is balanced and inspecting for obstructions.

How much does it cost to fix E08 error?

Repair costs for the E08 error range from $150 to $350, depending on the region and parts needed.

When should I call a technician for E08?

Call a technician if the error persists after basic checks, if you hear unusual noises, or if there's water leakage.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!