Siemens Washing Machine Error E00

⚡ Quick Answer: The Siemens washing machine error E00 typically indicates a malfunction in the door lock mechanism. This may prevent the door from opening or closing ... ✅ DIY Fixable

What Does Error E00 Mean?

The Siemens washing machine error E00 typically indicates a malfunction in the door lock mechanism. This may prevent the door from opening or closing properly, often displaying the error at power-on, after a reset, or when starting a cycle. Performing basic troubleshooting steps, such as rebooting the machine or ensuring the door is securely latched, can help determine if the issue is temporary or requires professional attention.

Common Symptoms:

  • Error E00 displayed on panel, often at power‑on or after reset or during a cycle start

Possible Causes

  • Door Lock Assembly

How to Fix Error E00

DIY Fix Basic checks when E00 appears

  1. Turn the washing machine off and unplug it for 5–10 minutes, then plug it back in and restart.
  2. Ensure water supply valves are open and hoses are properly connected.
  3. Check that the door is fully closed and latched before starting a cycle.
  4. Observe whether the code persists or if normal operation resumes after reset.

Technician Only Diagnostic review for persistent E00 display

  1. Connect diagnostic tool if available and check machine’s service data to see if stored fault entries exist.
  2. Inspect wiring harnesses and connectors for the control board and user interface display for loose/corroded connections.
  3. Verify proper functioning of control board and panel display; replace only if confirmed defective by diagnostics.

Parts needed: multimeter/diagnostic tool, screwdrivers, potential control board or display panel (if verified defective)

🛑 When to Call a Pro:
  • If the code persists after basic resets and the machine refuses to run any wash cycles.
  • If unusual noises, leaks, or other abnormal behavior accompany the error.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Siemens 00123456789
voltage_rating 240V AC

Common Questions

What does E00 error mean on Siemens washing machine?

E00 indicates a malfunction in the door lock mechanism, preventing proper door operation.

Can I fix Siemens washing machine E00 error myself?

Yes, try rebooting the machine and ensuring the door is fully closed before starting a cycle.

How much does it cost to fix E00 error?

Repair costs vary from $50 to over $300, depending on model and service required.

When should I call a technician for E00?

Call a technician if the error persists after resets or if the machine shows unusual behavior.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!