Siemens Oven Error E6501

⚡ Quick Answer: The Siemens Oven error code E6501 signifies a heating element malfunction, often characterized by unusual sounds and failure to reach the set temperat... ✅ DIY Fixable

What Does Error E6501 Mean?

The Siemens Oven error code E6501 signifies a heating element malfunction, often characterized by unusual sounds and failure to reach the set temperature. This issue may stem from problems with the control panel or electronic control system, leading to unresponsive behavior until a reset is performed.

Common Symptoms:

  • E6501 displayed on oven control panel
  • Oven may become unresponsive until reset

Possible Causes

  • Control panel or electronic control malfunction (low)

How to Fix Error E6501

DIY Fix Basic power reset

  1. Switch off the oven at the mains or circuit breaker.
  2. Wait at least 10 minutes.
  3. Turn the oven back on and check if the error clears.

Technician Only Inspect control electronics and wiring

  1. Verify correct mains voltage and check power supply connections.
  2. Inspect control panel connections and wiring harness for damage or loose connectors.
  3. Test or replace the electronic control board if diagnostics indicate a fault.

Parts needed: Control board / PCB, Control panel interface, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after a proper power reset.
  • If the oven is intermittently losing control functions.
  • If internal electrical inspection is required.

Technical Specifications

wattage 2500W
component Heating Element
resistance 10-30 ohms
part_number Siemens 00650736
voltage_rating 230V AC

Common Questions

What does E6501 error mean on Siemens Oven?

E6501 indicates a heating element malfunction, often with strange sounds and inability to reach the desired temperature.

Can I fix Siemens Oven E6501 error myself?

Yes, perform a basic power reset by turning off the oven for at least 10 minutes and then turning it back on.

How much does it cost to fix E6501 error?

Repair costs for the E6501 error range from USD 150 to 450, depending on parts and labor.

When should I call a technician for E6501?

Call a technician if the error persists after a reset, if control functions are intermittent, or if internal inspection is needed.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!