Siemens Oven Error E105
⚡ Quick Answer: The Siemens Oven error code E105 typically indicates a malfunction in the heating element, which can lead to improper heating or inconsistent temperat... ✅ DIY Fixable
What Does Error E105 Mean?
The Siemens Oven error code E105 typically indicates a malfunction in the heating element, which can lead to improper heating or inconsistent temperature readings. This issue may also be linked to a potential temperature sensor or thermostat problem. If this error appears, the oven may not function normally, necessitating further inspection or repair.
Common Symptoms:
- Error code E105 displayed on oven control panel
- Oven may not operate normally when code appears
Possible Causes
- Possible temperature sensor or thermostat issue (unofficial community source) (low)
How to Fix Error E105
DIY Fix Check basic oven status and reset
- Turn off the oven and disconnect power (e.g., unplug or switch off at breaker) for at least 1–2 minutes.
- Reconnect power and try restarting the oven to see if the error clears.
- Ensure the oven door is fully closed and clean any obvious dirt or moisture from the control panel and door area before use.
- If the error repeats, note when it occurs (e.g., during heating, preheating, or idle).
Technician Only Inspect temperature sensor / thermostat circuit
- Verify the model-specific error definitions by consulting the exact Siemens oven model manual or Siemens online service assistant using the exact E‑Nr of your appliance.
- Check continuity and connections of the oven’s internal temperature sensor or thermostat.
- Inspect wiring harnesses for loose or damaged connectors.
- Replace the temperature sensor/thermostat if diagnostic tests indicate a fault.
- Test the oven operation after repairs to confirm resolution.
Parts needed: Oven temperature sensor (thermistor/thermostat), Wiring harness/connectors
- If the error persists after a power reset
- If the oven fails to heat or operates unsafely (e.g., overheating, erratic temperature behavior)
- If internal inspections reveal damaged wiring or components
Next step
Choose the next step for E105
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2500W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Siemens 00619580 |
| voltage_rating | 230V AC |
Common Questions
What does E105 error mean on Siemens Oven?
E105 indicates a heating element malfunction or possible temperature sensor issue, resulting in improper heating.
Can I fix Siemens Oven E105 error myself?
Yes, you can try resetting the oven by disconnecting power for 1-2 minutes and checking the door and control panel.
How much does it cost to fix E105 error?
Repair costs range from ¥5,000 to ¥25,000+, depending on parts and service needed.
When should I call a technician for E105?
Call a technician if the error persists after a reset, or if the oven operates unsafely.
Sources & References
- Siemens Ovens Error Codes list (unofficial) (community)
- Siemens Home appliance error codes overview (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!