Siemens Oven Error E106
⚡ Quick Answer: The Siemens Oven error E106 indicates a fault in the temperature sensing or door lock mechanism. This may result in the oven failing to heat or operat... ✅ DIY Fixable
What Does Error E106 Mean?
The Siemens Oven error E106 indicates a fault in the temperature sensing or door lock mechanism. This may result in the oven failing to heat or operate, especially during self-cleaning cycles. Common symptoms include an error display, interrupted cleaning cycles, and issues with the door lock mechanism. The problem is often linked to a defective temperature sensor (NTC) or a malfunctioning door lock assembly.
Common Symptoms:
- Error appears on display and oven stops heating or operating
- Oven self‑cleaning/pyrolysis cycle fails to start or is interrupted
- Door lock may not engage or disengage properly
Possible Causes
- Defective or misreading temperature sensor (NTC) causing incorrect temperature monitoring (medium)
- Malfunctioning door lock/locking mechanism (medium)
How to Fix Error E106
DIY Fix Basic reset and checks
- Turn the oven off and disconnect from power completely for ~10 minutes to allow electronics to reset
- Ensure oven door is fully closed and latch is properly seated
- Attempt to restart normal operations after reset
Technician Only Inspect and test temperature sensor and door lock assembly
- Disconnect power to oven at the circuit breaker
- Remove access panels to reach temperature sensor (NTC) and door lock mechanism
- Test the sensor for correct resistance per manufacturer specifications; replace if out of range
- Inspect door lock motor/switch and wiring for damage or disconnection; replace faulty parts as needed
- Reassemble and test oven functions including self‑clean/pyrolyse if applicable
Parts needed: Temperature sensor (NTC), Door lock motor or switch, Associated wiring/connectors
- If E106 persists after basic resets and visual checks
- If the door lock fails to engage or disengage correctly
- If temperature readings remain erratic or sensor tests fail
Next step
Choose the next step for E106
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2500W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Siemens 00650871 |
| voltage_rating | 230V AC |
Common Questions
What does E106 error mean on Siemens Oven?
E106 indicates a malfunction in the temperature sensor or door lock, causing heating issues.
Can I fix Siemens Oven E106 error myself?
Yes, you can try basic resets and checks, such as ensuring the door is fully closed and disconnecting power.
How much does it cost to fix E106 error?
Repair costs range from $80 to $300+, depending on parts and labor.
When should I call a technician for E106?
Call a technician if the error persists after resets, or if the door lock or temperature readings remain faulty.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!