Siemens Oven Error E147

⚡ Quick Answer: The Siemens Oven error code E147 indicates a potential malfunction in the temperature sensor, which can lead to erratic temperature readings and incon... ✅ DIY Fixable

What Does Error E147 Mean?

The Siemens Oven error code E147 indicates a potential malfunction in the temperature sensor, which can lead to erratic temperature readings and inconsistent cooking results. This issue may require further investigation to determine the exact cause and resolution.

Possible Causes

  • Temperature Sensor
  • Wiring Issues
  • Control Board Malfunction

How to Fix Error E147

DIY Fix Check Model‑Specific Error Code Information

  1. Locate the appliance’s exact model number from the type plate on the oven.
  2. Visit Siemens’ official online support for error codes and enter the exact E‑Nr to fetch model‑specific guidance, which may include E147 details.
  3. If the official support requires login, register the appliance to access full error code explanations.

DIY Fix Basic Oven Reset

  1. Turn off the oven at the mains or circuit breaker.
  2. Wait 1–2 minutes to allow any internal electronics to power down.
  3. Restore power and check if the error persists.

Technician Only Professional Diagnostic Using Siemens Service Tools

  1. Use Siemens service diagnostic interface with the exact model’s E‑Nr to read the fault code log, including E147 if supported.
  2. Interpret service tool code descriptions to pinpoint specific system faults.
  3. Test relevant components (sensors, wiring, control modules) indicated by the official diagnostic output.
🛑 When to Call a Pro:
  • If the code persists after attempting reset and official documentation lookup via Siemens support.
  • If the oven exhibits unsafe behavior (e.g., overheating, inability to open door, unusual noises).

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms at room temperature
part_number Siemens 00614557
voltage_rating 240V AC

Common Questions

What does E147 error mean on Siemens Oven?

E147 error indicates a malfunction in the temperature sensor, causing erratic temperature readings.

Can I fix Siemens Oven E147 error myself?

Yes, you can check the model-specific error code information and perform a basic oven reset.

How much does it cost to fix E147 error?

Repair costs vary by model and region; consult a technician for an accurate estimate.

When should I call a technician for E147?

Call a technician if the error persists after a reset or if the oven shows unsafe behavior.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!