Siemens Dryer Error E19

⚡ Quick Answer: The Siemens dryer E19 error indicates a malfunction in the heating element, often due to blocked airflow or issues with the internal electronics. This... ✅ DIY Fixable

What Does Error E19 Mean?

The Siemens dryer E19 error indicates a malfunction in the heating element, often due to blocked airflow or issues with the internal electronics. This error may cause the dryer to stop mid-cycle, result in prolonged drying times, and lead to reduced airflow or overheating. Cleaning the condenser and ensuring proper airflow can help resolve the issue.

Common Symptoms:

  • Error E19 displayed on dryer control panel
  • Dryer may interrupt cycle or stop mid‑cycle
  • Possible prolonged drying times
  • Reduced airflow or overheating due to restricted condenser/heat exchanger

Possible Causes

  • Condenser/heat exchanger blockage or contamination (medium)
  • Internal software/configuration/electronics fault (low)

How to Fix Error E19

DIY Fix Clean condenser and ensure airflow paths are clear

  1. Unplug the dryer from power.
  2. Locate the condenser or heat exchanger compartment (as per model manual).
  3. Remove and rinse the condenser under lukewarm water to clear lint, dust, and debris.
  4. Ensure vents, lint filters, and airflow channels are not blocked.
  5. Reassemble and restore power.

DIY Fix Power cycle the dryer

  1. Turn off the dryer and unplug it.
  2. Wait 10–15 minutes to allow residual charge to dissipate.
  3. Plug the dryer back in and restart a drying cycle.
  4. Check if the E19 error clears.

Technician Only Inspect control electronics and configuration memory

  1. Enter service mode if available and check EEPROM/configuration status.
  2. Verify correct board programming for the specific dryer model.
  3. Test main control board for faults, reprogram or replace if necessary.
  4. Check wiring harnesses and connectors for damage or loose contacts.

Parts needed: control board/PCB, EEPROM module (if separate)

🛑 When to Call a Pro:
  • If cleaning airflow paths and power cycling do not clear the error
  • If the error returns repeatedly after maintenance
  • If there are signs of electronics damage (burn marks, smell)

Technical Specifications

wattage 2400W
component Heating Element
resistance 10-20 ohms
part_number Siemens 00620625
voltage_rating 230V AC

Common Questions

What does E19 error mean on Siemens dryer?

E19 indicates a heating element malfunction, often due to airflow blockage or electronic faults.

Can I fix Siemens dryer E19 error myself?

Yes, you can clean the condenser and power cycle the dryer to try resolving the issue.

How much does it cost to fix E19 error?

Repair costs for the E19 error typically range from €150 to €400.

When should I call a technician for E19?

Call a technician if the error persists after cleaning or if there are signs of electronic damage.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!