Siemens Dryer Error E05
⚡ Quick Answer: The Siemens dryer E05 error indicates a malfunction in the heating element, typically caused by a faulty NTC temperature sensor. This can lead to the ... ⚠️ Difficulty Varies
What Does Error E05 Mean?
The Siemens dryer E05 error indicates a malfunction in the heating element, typically caused by a faulty NTC temperature sensor. This can lead to the dryer failing to produce heat during operation or stopping the drying cycle prematurely. It's essential to check the airflow and sensor for proper function to resolve this issue.
Common Symptoms:
- Drying cycle stops prematurely with E05 displayed
- Dryer may not heat properly or airflow may be impacted
Possible Causes
- Faulty NTC temperature sensor in air/heat path (medium)
How to Fix Error E05
DIY Fix Basic checks for E05 on a Siemens dryer
- Unplug the dryer from the power outlet.
- Check and clean the lint filter and any accessible venting to ensure proper airflow.
- Ensure that nothing is blocking the dryer’s air intake or exhaust.
- Plug the dryer back in and try a short cycle to see if the error persists.
Technician Only Diagnose and repair NTC sensor and wiring
- Disconnect power and open the dryer’s access panel to locate the NTC temperature sensor (typically near the heater or in the duct).
- Visually inspect the sensor, connector, and wiring harness for damage, corrosion, or loose connections.
- Measure the NTC sensor resistance at room temperature with a multimeter and compare to model-specific specifications.
- Replace the NTC sensor if out of spec. Repair or replace damaged wiring/connectors as needed.
- Reassemble and test the dryer.
Parts needed: NTC temperature sensor, wiring harness/connectors
- If the error persists after basic airflow and sensor checks
- If internal diagnostics or electrical testing are required beyond safe user-level skills
Next step
Choose the next step for E05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Siemens 00620366 |
| voltage_rating | 240V AC |
Common Questions
What does E05 error mean on Siemens dryer?
E05 indicates a heating element malfunction due to a faulty NTC temperature sensor.
Can I fix Siemens dryer E05 error myself?
Yes, you can check airflow and clean the lint filter, but sensor issues may need a technician.
How much does it cost to fix E05 error?
Repair costs range from $30 to $120 for parts, excluding labor.
When should I call a technician for E05?
If the error persists after basic checks or if internal diagnostics are needed.
Sources & References
- Siemens Trockner Fehlercode: E05 (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!