Siemens Dryer Error E02

⚡ Quick Answer: The Siemens dryer E02 error code indicates a malfunction related to the heating element, commonly caused by a clogged lint filter or airflow obstructi... ✅ DIY Fixable

What Does Error E02 Mean?

The Siemens dryer E02 error code indicates a malfunction related to the heating element, commonly caused by a clogged lint filter or airflow obstruction. This can lead to reduced drying performance or the dryer stopping altogether. Regular maintenance, such as cleaning the lint filter and ensuring proper airflow, is essential to prevent this issue and maintain optimal dryer functionality.

Common Symptoms:

  • Error code E02 displayed on dryer
  • Dryer stops or won’t start a cycle
  • Reduced airflow or drying performance

Possible Causes

  • Clogged or blocked lint filter (medium)
  • Restricted airflow due to general dust/fluff accumulation (medium)

How to Fix Error E02

DIY Fix Clean the lint filter and ensure proper airflow

  1. Turn off and unplug the dryer.
  2. Open the dryer door and remove the lint filter.
  3. Remove all visible lint by hand and under running water if necessary.
  4. Allow the filter to fully dry, then reinstall it.
  5. Check and clean the surrounding housing for any additional buildup.
  6. Restart the dryer and recheck for error.

Technician Only Inspect internal airflow paths and vents

  1. Disconnect and move the dryer to access the rear and venting system.
  2. Remove external vent hoses and clean them thoroughly.
  3. Inspect and clean the internal condenser/heat exchanger (if applicable).
  4. Verify that all vents and ducts are free of lint buildup or blockages.
  5. Test the dryer for proper airflow and error recurrence.

Parts needed: Vent hose, Lint filter assembly, Condenser/heat exchanger (if applicable)

🛑 When to Call a Pro:
  • If cleaning lint filter and vents does not clear the E02 error
  • If airflow restrictions persist after maintenance
  • If other error codes appear simultaneously or dryer overheats

Technical Specifications

wattage 2800W
component Heating Element
resistance 10-15 ohms
part_number Siemens 00605657
voltage_rating 230V AC

Common Questions

What does E02 error mean on Siemens dryer?

E02 error indicates a malfunction in the heating element, often due to a clogged lint filter.

Can I fix Siemens dryer E02 error myself?

Yes, you can clean the lint filter and check for airflow obstructions.

How much does it cost to fix E02 error?

Estimated repair costs range from $50 to $150, depending on the service needed.

When should I call a technician for E02?

Call a technician if cleaning does not resolve the error or if other issues arise.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!