Siemens Dryer Error E16

⚡ Quick Answer: The Siemens dryer E16 error indicates a door lock malfunction or a door that is not properly closed. This may prevent the dryer from starting or cause... ✅ DIY Fixable

What Does Error E16 Mean?

The Siemens dryer E16 error indicates a door lock malfunction or a door that is not properly closed. This may prevent the dryer from starting or cause it to stop mid-cycle. Common causes include misalignment of the door latch, a faulty door lock assembly, or issues with wiring. Ensure the door is securely closed and latched to resolve the issue.

Common Symptoms:

  • Dryer won’t start or stops mid-cycle with E16 displayed
  • Door not locking properly or detected as open
  • No secure latch feedback detected by control

Possible Causes

  • Door not fully closed or latch misalignment (medium)
  • Faulty door lock/interlock assembly or feedback switch (medium)
  • Loose or damaged wiring between door lock and control (medium)

How to Fix Error E16

DIY Fix Check and reseat the dryer door

  1. Ensure laundry isn’t blocking the door from closing fully.
  2. Open and firmly close the dryer door until you hear the latch engage.
  3. Restart the drying cycle.

DIY Fix Inspect door lock area for debris

  1. Visually inspect the door lock and surrounding seal for lint, dirt, or obstructions.
  2. Clean gently with a soft brush or cloth.
  3. Attempt to close and start a cycle again.

Technician Only Test and replace the door lock/interlock assembly

  1. Disconnect power and access the door lock assembly.
  2. Test the lock solenoid and feedback switch with a multimeter for correct operation.
  3. Replace the door lock assembly if out of spec.
  4. Check related wiring harness and connectors for damage or looseness.

Parts needed: door lock/interlock assembly, wiring harness connectors

🛑 When to Call a Pro:
  • If after checking the door and cleaning the latch the error persists
  • If door lock tests show intermittent or no continuity and replacement is needed
  • If wiring or control board interactions are suspected beyond basic user inspection

Technical Specifications

wattage 2400W
component Heating Element
resistance 10-20 ohms
part_number Siemens 00620212
voltage_rating 230V AC

Common Questions

What does E16 error mean on siemens dryer?

E16 indicates a door lock issue or that the door is not securely closed, preventing the dryer from operating.

Can I fix siemens dryer E16 error myself?

Yes, check if the door is fully closed and clean the door lock area to ensure proper engagement.

How much does it cost to fix E16 error?

Repair costs range from $50 to $150 for parts, plus labor.

When should I call a technician for E16?

Call a technician if the error persists after checking the door or if you suspect wiring or control board issues.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!