Siemens Dryer Error E15

⚡ Quick Answer: The Siemens dryer E15 error indicates a blockage in the drainage system, often due to an internal leak or water accumulation. Symptoms include the err... ✅ DIY Fixable

What Does Error E15 Mean?

The Siemens dryer E15 error indicates a blockage in the drainage system, often due to an internal leak or water accumulation. Symptoms include the error code displayed on the panel, the dryer stopping mid-cycle, and water present in the base or condensation tray. The pump may also run continuously despite no water draining, suggesting issues with condensate hoses or the float switch.

Common Symptoms:

  • Error E15 displayed on dryer panel
  • Dryer may stop mid‑cycle or refuse to start
  • Presence of water inside base tray or condensation tray
  • Pump may run continuously even without water draining

Possible Causes

  • Internal leak or water accumulation detected by float switch (medium)
  • Leaking or loose condensate hoses, cracked sump, or tank components (medium)

How to Fix Error E15

DIY Fix Inspect external water accumulation and empty condensation container

  1. Unplug the dryer from power.
  2. Pull the dryer away from the wall and check for visible water under or around the unit.
  3. If applicable, remove and empty the condensation container or tray.
  4. Let the dryer dry completely before attempting another cycle.

Technician Only Check and repair internal leak path, hoses, and float switch

  1. Disconnect power and access the dryer’s base or front panel.
  2. Inspect condensate hoses, clamps, sump, and water tank for cracks or leaks.
  3. Replace or tighten any damaged hoses and cracked components.
  4. Verify float switch operation and reset once the water is cleared.
  5. Test dryer for leaks during a short run.

Parts needed: Condensate hose(s), Sump assembly / water tank, Float switch, Hose clamps

🛑 When to Call a Pro:
  • If water continues to accumulate after draining and basic checks
  • If internal components show significant damage or leak paths are unclear
  • If you are not comfortable performing internal inspections

Technical Specifications

wattage 100W
component Drain Pump Assembly
resistance 15-25 ohms
part_number Siemens 00611457
voltage_rating 230V AC

Common Questions

What does E15 error mean on siemens dryer?

E15 indicates a drainage issue, often due to internal leaks or water accumulation.

Can I fix siemens dryer E15 error myself?

Yes, you can inspect for water accumulation and empty the condensation container.

How much does it cost to fix E15 error?

Repair costs are medium, varying based on parts and labor depending on the model.

When should I call a technician for E15?

Call if water persists after basic checks or if internal damage is suspected.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!