Siemens Dryer Error E10
⚡ Quick Answer: The Siemens dryer error E10 indicates a malfunction related to the moisture or humidity sensor, often resulting in no heat during the drying cycle. Th... ✅ DIY Fixable
What Does Error E10 Mean?
The Siemens dryer error E10 indicates a malfunction related to the moisture or humidity sensor, often resulting in no heat during the drying cycle. This issue can cause the dryer to stop mid-cycle or fail to complete drying altogether. It’s important to check and clean the moisture sensor, which may be contaminated with lint or residue, leading to misreading moisture levels.
Common Symptoms:
- Error E10 appears on display during or after a drying cycle
- Dryer may stop mid-cycle or fail to complete drying
- No additional specific symptom from official sources
Possible Causes
- Moisture sensor fault or contaminated sensor (medium)
How to Fix Error E10
DIY Fix Basic user cleanup of sensor area
- Turn off and unplug the dryer.
- Locate the moisture sensor (usually inside the drum near sensors; refer to manual).
- Gently clean the sensors with a soft cloth to remove lint or residue.
- Plug dryer back in and restart a drying cycle to test if code clears.
Technician Only Moisture sensor inspection and replacement
- Verify E10 code persistence after basic cleaning.
- Use service manual to locate exact moisture/humidity sensor component.
- Test sensor continuity and signal to control board with appropriate tools.
- Replace sensor if found defective; verify connections and board communication.
Parts needed: Moisture/humidity sensor
- After basic cleaning and restart if code persists
- If internal diagnostics fail to identify sensor fault safely
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Humidity Sensor
Measures relative humidity so the appliance can regulate drying or moisture removal.
- Typical part-only price
- $20 - $100
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Siemens 00620787 |
| voltage_rating | 240V AC |
Common Questions
What does E10 error mean on siemens dryer?
E10 indicates a moisture sensor malfunction, causing drying issues.
Can I fix siemens dryer E10 error myself?
Yes, you can clean the moisture sensor to resolve the issue.
How much does it cost to fix E10 error?
Repair costs typically range from $40 to $150, depending on parts and labor.
When should I call a technician for E10?
Call a technician if the error persists after cleaning or if diagnostics fail.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!