Siemens Dryer Error E08
⚡ Quick Answer: The Siemens dryer E08 error indicates a malfunction in the heating element or heat pump system, leading to insufficient heat during the drying cycle. ... ✅ DIY Fixable
What Does Error E08 Mean?
The Siemens dryer E08 error indicates a malfunction in the heating element or heat pump system, leading to insufficient heat during the drying cycle. This may be due to a fault in the heat pump compressor or refrigerant circuit, resulting in the dryer failing to generate warm air and completing its drying cycle.
Common Symptoms:
- Dryer displays E08 on panel
- Dryer may not heat or produce warm air
- Drying cycle fails to complete
Possible Causes
- Heat pump system fault (compressor/refrigerant circuit) (medium)
- Defective internal circulation components (fan/airflow blockage) (medium)
How to Fix Error E08
DIY Fix Basic checks before service
- Unplug the dryer and power it back on after a few minutes to see if fault clears
- Clean lint filters and check that airflow paths are clear (external and condenser area)
- Ensure adequate ventilation around the dryer
Technician Only Heat pump system diagnostic and repair
- Check internal circulation fan for operation and replace if defective
- Inspect evaporator and condenser coils for blockage and clean carefully
- Test heat pump compressor operation and refrigerant circuit for leaks/pressure issues
- Replace faulty heat pump compressor unit if required
Parts needed: Heat pump compressor unit, Heat pump fan motor, Seals and refrigerant service parts
- If E08 persists after basic checks
- If there is no heating and internal components like compressor or fan are suspected faulty
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Siemens 00753680 |
| voltage_rating | 230V AC |
Common Questions
What does E08 error mean on siemens dryer?
E08 indicates a heating element malfunction or heat pump issue, causing no heat during drying.
Can I fix siemens dryer E08 error myself?
Yes, try unplugging the dryer, cleaning lint filters, and ensuring airflow is clear.
How much does it cost to fix E08 error?
Repair costs range from $300 to $1200+, depending on parts and labor.
When should I call a technician for E08?
Call a technician if E08 persists after basic checks or if internal components are suspected to be faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!