Siemens Dishwasher Error E24
⚡ Quick Answer: The Siemens Dishwasher E24 error indicates a drainage issue, often resulting from a blocked drain hose or clogged filter. Symptoms include water remai... ✅ DIY Fixable
What Does Error E24 Mean?
The Siemens Dishwasher E24 error indicates a drainage issue, often resulting from a blocked drain hose or clogged filter. Symptoms include water remaining in the dishwasher after cycles, the appliance stopping mid-cycle, and the drain pump running without expelling water. Timely attention to these problems can prevent further complications.
Common Symptoms:
- Water remains in dishwasher after or during wash cycle
- Dishwasher stops mid-cycle
- Drain pump sounds running but water not exiting
- Error appears at end of program
Possible Causes
- Blocked or clogged drain hose (high)
- Clogged filter or sump area (high)
- Blocked or obstructed pump inlet/impeller (medium)
- Drain pump malfunction (medium)
How to Fix Error E24
DIY Fix Check and clean drain filter and sump
- Turn off and unplug the dishwasher
- Remove the bottom rack
- Twist out and remove the filter assembly
- Rinse filter and sump area under running water to remove debris
- Reinstall filter, close dishwasher and run a short drain cycle
DIY Fix Inspect and clear drain hose
- Turn off dishwasher and disconnect power
- Pull dishwasher out and locate drain hose from dishwasher to sink drain
- Straighten any kinks and disconnect hose if necessary
- Flush hose with water to clear blockages
- Reconnect hose ensuring proper height and no bends
Technician Only Inspect and service drain pump and impeller
- Disconnect dishwasher from power and water
- Remove access panels and lower cover to reach drain pump
- Check impeller for debris or damage
- Test pump operation and replace if faulty
Parts needed: Drain pump, Impeller, Seals/gaskets
- If drain pump tests faulty or impeller is damaged
- If cleaning hoses and filters does not resolve E24
- If water leaks occur or dishwasher still fails to drain after user‑level steps
Next step
Choose the next step for E24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Siemens 00610367 |
| voltage_rating | 230V AC |
Common Questions
What does E24 error mean on Siemens Dishwasher?
E24 error indicates a drainage issue, often with water remaining in the appliance after cycles.
Can I fix Siemens Dishwasher E24 error myself?
Yes, you can check and clean the drain filter and hose to attempt a fix.
How much does it cost to fix E24 error?
Estimated repair costs range from $50 to $200 for parts and labor.
When should I call a technician for E24?
Call a technician if cleaning does not resolve the issue or if there are leaks.
Sources & References
- Siemens Dishwasher E24 Error Troubleshooting (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!