Siemens Dishwasher Error E05

⚡ Quick Answer: The Siemens Dishwasher E05 error code indicates a malfunction within the electronic control system, likely due to an internal electronics fault or pro... ✅ DIY Fixable

What Does Error E05 Mean?

The Siemens Dishwasher E05 error code indicates a malfunction within the electronic control system, likely due to an internal electronics fault or program interruption. Users may notice that the dishwasher fails to start or completes a cycle improperly, often accompanied by unusual noises. A temporary electronic glitch may also trigger this error. To resolve the issue, a simple reset may be attempted, but persistent errors indicate a need for professional diagnostics.

Common Symptoms:

  • Dishwasher displays E05 on the control panel
  • Program interrupts or will not start properly
  • Dishwasher may reset and run after multiple restarts (community observation) %C3%BCler-sm6p1s-fehlermeldung-e05/?utm_source=chatgpt.com))

Possible Causes

  • Internal electronics fault / program interruption (high)
  • Temporary electronic glitch (e.g., power fluctuation or contact issue) (medium)

How to Fix Error E05

DIY Fix Basic Reset and Check Power/Water

  1. Turn off the dishwasher using the On/Off switch.
  2. Wait several minutes, then turn it back on to see if the error clears.
  3. If E05 persists, turn off the water tap and disconnect the dishwasher from the power supply.
  4. Wait a few minutes and reconnect to power and water before retrying.

Technician Only Diagnostic Electronics Inspection

  1. Verify wiring and connectors to the main control board for loose or corroded contacts.
  2. Perform diagnostic tests on the main control electronics with manufacturer tools.
  3. Replace control board or affected electronic components only if diagnostics confirm failure.

Parts needed: Main control board, Associated connectors and wiring harnesses

🛑 When to Call a Pro:
  • If the error persists after resetting and powering down, and basic checks do not resolve it.
  • If diagnostic attempts by a technician confirm an electronic fault on the control board.

Technical Specifications

wattage 30W
component Drain Pump
resistance 20-30 ohms
part_number Siemens 00619594
voltage_rating 230V AC

Common Questions

What does E05 error mean on Siemens Dishwasher?

E05 indicates an internal electronics fault or program interruption in the dishwasher.

Can I fix Siemens Dishwasher E05 error myself?

Yes, you can attempt a basic reset by turning off and on the dishwasher, but persistent errors may require professional help.

How much does it cost to fix E05 error?

Repair costs vary based on parts and labor, typically ranging from moderate to high.

When should I call a technician for E05?

Call a technician if the error persists after a reset or if diagnostics confirm an electronic fault.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!