Siemens Dishwasher Error E01
⚡ Quick Answer: The Siemens Dishwasher error E01 indicates a fault in the electronic control system, leading to drainage issues and possible program interruptions. Sy... ⚠️ Difficulty Varies
What Does Error E01 Mean?
The Siemens Dishwasher error E01 indicates a fault in the electronic control system, leading to drainage issues and possible program interruptions. Symptoms include the E01 code appearing on the display, the program failing to start or stop unexpectedly, and unusual sounds during operation. This error often requires professional diagnosis and repair to address the underlying electronic issues.
Common Symptoms:
- E01 displayed on the dishwasher’s digital display
- Program may stop or not start
- Display may show E01 on power‑up or shortly after cycle start
Possible Causes
- Fault in the dishwasher’s electronic control system (high)
How to Fix Error E01
DIY Fix Restart and basic reset of the dishwasher
- Turn off the dishwasher using the On/Off switch.
- Wait a few minutes before turning it back on.
- If the error persists, turn off the water supply.
- Disconnect the dishwasher from the power supply.
Technician Only Professional diagnostic and repair
- Inspect the control electronics and wiring for faults or damage.
- Use diagnostic tools to check for electronic board failures.
- Replace faulty electronic modules or components as identified.
Parts needed: Main control board / electronic module, Associated wiring harness
- If the error persists after reset and power cycling
- If any signs of electrical damage (burn marks, smoke smell) are present
- If non‑technical troubleshooting does not resolve the issue
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Siemens 00619918 |
| voltage_rating | 230V AC |
Common Questions
What does E01 error mean on Siemens Dishwasher?
E01 indicates a fault in the electronic control system, causing drainage problems and potential program interruptions.
Can I fix Siemens Dishwasher E01 error myself?
You can attempt a restart and basic reset, but if the error persists, professional help is recommended.
How much does it cost to fix E01 error?
The estimated repair cost for E01 error ranges from $75 to $300+, depending on the model and region.
When should I call a technician for E01?
Call a technician if the error persists after a reset, if there are signs of electrical damage, or if troubleshooting fails.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!