Siemens Dishwasher Error E17

⚡ Quick Answer: The Siemens Dishwasher E17 error indicates a water supply issue, often due to an abnormal flow or internal water leak. Symptoms include the dishwasher... ✅ DIY Fixable

What Does Error E17 Mean?

The Siemens Dishwasher E17 error indicates a water supply issue, often due to an abnormal flow or internal water leak. Symptoms include the dishwasher stopping shortly after starting and failing to fill with the correct amount of water. Additionally, the internal flood tray may detect water, triggering the safety system. Checking the water supply and inlet hose is essential for troubleshooting this error.

Common Symptoms:

  • Dishwasher stops shortly after starting with E17 displayed
  • Dishwasher fails to fill with appropriate water amount
  • Internal flood tray/float may detect water and trigger safety

Possible Causes

  • Water inlet flow issue (too little or blocked) (medium)
  • Internal water leak / flood detection (medium)

How to Fix Error E17

DIY Fix Check water supply and inlet hose

  1. Turn off the dishwasher and unplug it.
  2. Check that the water supply valve to the dishwasher is fully open.
  3. Inspect the inlet hose for kinks, bends, or blockages.
  4. Remove and clean the inlet filter screen where the hose connects.

DIY Fix Dry base tray if water is present

  1. Disconnect the dishwasher from power and water supply.
  2. Carefully tip the dishwasher slightly backward to drain any water from the base into towels or a container.
  3. Allow the base area to dry completely before reconnecting and restarting.

Technician Only Inspect internal leak sources and flow components

  1. Open the dishwasher access panels.
  2. Check the lower tub and flood tray for signs of water leakage.
  3. Inspect inlet valve, flow meter/sensor, and associated wiring.
  4. Replace defective parts (e.g., inlet valve, Aquastop assembly, flood sensor) if confirmed faulty.

Parts needed: inlet valve, flow meter/flow sensor, flood tray sensor, Aquastop hose assembly

🛑 When to Call a Pro:
  • If the error persists after checking and correcting water supply and drying the base
  • If water is actively leaking into the base and cannot be located or resolved
  • If internal components like inlet valve or sensors appear damaged

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 5-15 ohms
part_number Siemens 00622267
voltage_rating 230V AC

Common Questions

What does E17 error mean on Siemens Dishwasher?

E17 indicates a water supply issue, causing the dishwasher to stop shortly after starting.

Can I fix Siemens Dishwasher E17 error myself?

Yes, check the water supply valve and inlet hose for kinks or blockages, and dry the base if water is present.

How much does it cost to fix E17 error?

Repair costs typically range from $100 to $300+, depending on parts and labor.

When should I call a technician for E17?

Call a technician if the error persists after troubleshooting or if you find water leaking internally.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!