Siemens Dishwasher Error E14

⚡ Quick Answer: The Siemens Dishwasher E14 error indicates a malfunction in the water inlet system, often preventing the dishwasher from filling with water. This erro... ✅ DIY Fixable

What Does Error E14 Mean?

The Siemens Dishwasher E14 error indicates a malfunction in the water inlet system, often preventing the dishwasher from filling with water. This error may result from issues such as a faulty water inlet flow sensor, a blockage or kink in the water supply hose, or clogged inlet filters. Addressing these problems promptly is essential to restore proper function and prevent further damage.

Common Symptoms:

  • Dishwasher stops filling with water when starting a cycle
  • Repeated start/stop of water intake
  • Error appears shortly after activation and prevents normal cycle

Possible Causes

  • Water inlet flow sensor (flow meter) fault or failure (high)
  • Water supply issue (blocked, kinked hose or closed tap) (high)
  • Clogged inlet filters or Aqua-Stop components (medium)

How to Fix Error E14

DIY Fix Check basic water supply and reset

  1. Turn off dishwasher and water supply tap
  2. Ensure inlet hose is not kinked or crushed
  3. Check that the water tap is fully open
  4. Disconnect power for a few minutes and restart dishwasher

Technician Only Inspect and service flow sensor and inlet components

  1. Access the water matrix area to inspect the flow meter
  2. Check flow meter wheel movement and clean debris if present
  3. Test flow meter electrical continuity and wiring to control board
  4. Replace flow meter if defective
  5. Inspect inlet valve and filters and replace if needed

Parts needed: Flow meter (water flow sensor), Inlet valve, Hose filters

🛑 When to Call a Pro:
  • If error persists after checking water supply and basic troubleshooting
  • If water inlet parts or flow sensor tests fail or are damaged
  • If leakage or water protection system is triggered frequently

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 1000 ohms
part_number Siemens 00626737
voltage_rating 230V AC

Common Questions

What does E14 error mean on Siemens Dishwasher?

E14 error indicates a malfunction in the water inlet system, causing the dishwasher to stop filling.

Can I fix Siemens Dishwasher E14 error myself?

Yes, you can check the water supply, ensure hoses are not kinked, and reset the system.

How much does it cost to fix E14 error?

Repair costs for the E14 error range from $50 to $200+, depending on parts and labor.

When should I call a technician for E14?

Call a technician if the error persists after troubleshooting or if parts are damaged.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!