Siemens Dishwasher Error E13
⚡ Quick Answer: The Siemens Dishwasher E13 error indicates a water leakage detection issue, often triggered by excessively high water temperatures detected during nor... ✅ DIY Fixable
What Does Error E13 Mean?
The Siemens Dishwasher E13 error indicates a water leakage detection issue, often triggered by excessively high water temperatures detected during normal operation. This error typically occurs mid-cycle, causing the dishwasher to stop and display the E13 code. Common causes include high inlet water temperature from the supply line, or a faulty temperature sensor (NTC) that misreads the water temperature. Addressing these issues promptly is essential to restore normal operation.
Common Symptoms:
- Dishwasher stops mid‑cycle with display showing E13
- High water temperature detected when machine is not heating
- Error appears shortly after start or during wash cycle
Possible Causes
- High inlet water temperature (too hot supply) (medium)
- Faulty temperature sensor (NTC) (medium)
How to Fix Error E13
DIY Fix Check water supply temperature
- Turn off and unplug the dishwasher.
- Verify whether the dishwasher’s water line is connected to hot or cold water.
- If connected to a hot water supply, reconnect to a cold water source to ensure inlet water is below ~60–75°C.
- Restart the dishwasher and see if the error persists.
Technician Only Inspect and test temperature sensor (NTC)
- Disconnect power and access the internal temperature sensor.
- Use a multimeter to measure the NTC resistance at various temperatures and compare to specifications.
- Replace the NTC sensor if values are out of spec or inconsistent.
- Test the dishwasher with controlled water temperature to verify the error is resolved.
Parts needed: NTC temperature sensor
- If error persists after verifying cold water connection and sensor checks.
- If internal diagnostics show inconsistent sensor readings or repeated false high temperature alerts.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1800W |
|---|---|
| component | Leakage Sensor |
| resistance | 5-15 ohms |
| part_number | Siemens 00619512 |
| voltage_rating | 230V AC |
Common Questions
What does E13 error mean on Siemens Dishwasher?
E13 indicates a water leakage detection issue due to excessively high water temperatures.
Can I fix Siemens Dishwasher E13 error myself?
Yes, check the water supply temperature and ensure it is connected to a cold water source.
How much does it cost to fix E13 error?
The estimated repair cost for E13 error is between ¥5,000 and ¥20,000, including parts and labor.
When should I call a technician for E13?
Call a technician if the error persists after checking the water connection and sensor.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!