Siemens Dishwasher Error E08

⚡ Quick Answer: The Siemens Dishwasher E08 error indicates a low water level in the rinse bath, often due to blocked water intake or insufficient water entering the w... ✅ DIY Fixable

What Does Error E08 Mean?

The Siemens Dishwasher E08 error indicates a low water level in the rinse bath, often due to blocked water intake or insufficient water entering the wash area. This malfunction may cause the dishwasher to stop mid-cycle and produce unusual sounds. Users should check for obstructions in the wash chamber and ensure the water supply is adequate to resolve the issue.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays E08
  • Insufficient water entering wash chamber
  • Possible dry rinse cycle or no water detected in rinse bath

Possible Causes

  • Low water level detected in rinse bath due to blocked or restricted water intake (high)

How to Fix Error E08

DIY Fix Check dish loading and water intake

  1. Open dishwasher and ensure no dishes, bowls, or utensils are tipped over or covering water intake openings inside the machine.
  2. Reposition dishes so water can flow freely into the wash area.
  3. Restart the dishwasher and observe whether the error clears.

DIY Fix Check water supply and inlet conditions

  1. Verify the water tap supplying the dishwasher is fully open.
  2. Inspect the water inlet hose for kinks or bends restricting flow.
  3. Ensure the inlet filter (if present) is not clogged with debris.

Technician Only Inspect internal water intake and sensors

  1. Check and clean the internal water intake openings and screens inside the dishwasher.
  2. Test the water level sensor to ensure it accurately detects water presence.
  3. Inspect hose connections and pressure switches related to water level detection.

Parts needed: Water level sensor, Water inlet hose, Internal intake screens

🛑 When to Call a Pro:
  • Error persists after basic user‑level checks and reloading or inlet checks
  • Water level sensor or internal components need specialist diagnosis

Technical Specifications

wattage 30W
component Drain Pump
resistance 20-30 ohms
part_number Siemens 00620697
voltage_rating 230V AC

Common Questions

What does E08 error mean on Siemens Dishwasher?

E08 error indicates a low water level in the rinse bath, which can halt operation and produce unusual sounds.

Can I fix Siemens Dishwasher E08 error myself?

Yes, check for dish obstructions and inspect the water supply and inlet hose for kinks or blockages.

How much does it cost to fix E08 error?

Repair costs range from $50 to $200+, depending on parts and labor in your area.

When should I call a technician for E08?

Call a technician if the error persists after user checks or if internal components need diagnosis.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!