Siemens Dishwasher Error E07
⚡ Quick Answer: The Siemens Dishwasher error E07 signifies a fault in the drying system, often linked to issues with the drying fan or airflow path. Users may notice ... ✅ DIY Fixable
What Does Error E07 Mean?
The Siemens Dishwasher error E07 signifies a fault in the drying system, often linked to issues with the drying fan or airflow path. Users may notice that the dishwasher stops mid-cycle, dishes remain wet after washing, and the E07 error appears on the display. Addressing this error typically involves checking for obstructions in the drying fan and ensuring proper drainage.
Common Symptoms:
- Dishwasher stops mid‑cycle
- Dishes remain wet after cycle
- Error E07 appears on display during or at end of cycle
Possible Causes
- Drying system fault (fan/ventilation) (high)
How to Fix Error E07
DIY Fix Basic user checks for E07
- Turn off and restart the dishwasher to reset temporary faults
- Ensure interior vents and drying fan areas are not obstructed by dishes
- Remove any standing water from tub and check filter area
- Verify drain hose is not kinked or blocked
Technician Only Technician diagnostics and repair
- Check drying fan motor and housing for debris, resistance or failure
- Inspect drying airflow path and Zeolith/heat exchanger (if equipped) for water damage or blockage
- Test related sensors and control board signals during drying cycle
Parts needed: Drying fan motor, Ventilation channels/ducts, Zeolith unit (if applicable), Sensors related to drying airflow
- If error persists after basic checks
- If water intrusion in drying system is suspected
- When internal components require testing or replacement
Next step
Choose the next step for E07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 15-25 ohms |
| part_number | Siemens 00620433 |
| voltage_rating | 230V AC |
Common Questions
What does E07 error mean on Siemens Dishwasher?
E07 indicates a fault in the drying system, causing the dishwasher to stop mid-cycle and leave dishes wet.
Can I fix Siemens Dishwasher E07 error myself?
Yes, you can try turning off the dishwasher, checking for obstructions in the drying fan, and removing standing water from the tub.
How much does it cost to fix E07 error?
Repair costs for the E07 error range from $150 to $400+, depending on parts and labor.
When should I call a technician for E07?
Call a technician if the error persists after basic checks or if internal components need testing or replacement.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!