Sharp Washing Machine Error E13
⚡ Quick Answer: The Sharp Washing Machine E13 error code indicates a drainage issue, commonly associated with a loud humming sound and a persistent error message on t... ✅ DIY Fixable
What Does Error E13 Mean?
The Sharp Washing Machine E13 error code indicates a drainage issue, commonly associated with a loud humming sound and a persistent error message on the display. This typically suggests that the machine is unable to properly drain water, potentially due to a clogged drain filter or a blocked drain hose. Addressing these components is crucial for resolving the issue and restoring normal function.
Common Symptoms:
- Error code E13 displayed on control panel
Possible Causes
- Clogged drain filter
- Faulty drain pump
- Kinked drain hose
How to Fix Error E13
DIY Fix Check drainage components
- Turn off and unplug the washing machine.
- Check and clean the drain filter for any lint, debris, or obstructions.
- Inspect the drain hose for kinks, bends, or blockages.
- Ensure the drain pump area is clear and able to move water freely.
DIY Fix Refer to official documentation or contact support
- Locate the exact model number of your Sharp washing machine.
- Access the official Sharp support site and check the Troubleshooting or Error Code diagnosis tool for your exact model.
- If E13 is not listed in the manual or support pages, contact Sharp customer support for clarification.
Technician Only Professional inspection of drainage and electrical systems
- Inspect and test drain pump operation for faults.
- Check internal sensors potentially related to water level or drainage.
- Inspect wiring and connectors for corrosion or damage.
- Use manufacturer service tools to read diagnostic codes.
- Repair or replace failed drainage components if verified.
Parts needed: Drain pump, Drain hose, Internal sensors
- If the error persists after basic drain checks
- If unusual noises, leaks, or inability to start cycles occur
- When the official manual does not list the E13 code for the specific model
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | SHARP 214123 |
| voltage_rating | 120V AC |
Common Questions
What does E13 error mean on Sharp Washing Machine?
E13 error indicates a drainage problem, often with a loud humming sound.
Can I fix Sharp Washing Machine E13 error myself?
Yes, check the drain filter and hose for blockages.
How much does it cost to fix E13 error?
Repair costs vary based on parts and labor needed.
When should I call a technician for E13?
Call a technician if the error persists after checks or if unusual issues occur.
Sources & References
- Sharp Washing Machine Error Codes (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!