Sharp Washing Machine Error E03

⚡ Quick Answer: The Sharp Washing Machine E03 error indicates a drainage fault where the machine has not drained water within the expected timeframe. Symptoms include... ✅ DIY Fixable

What Does Error E03 Mean?

The Sharp Washing Machine E03 error indicates a drainage fault where the machine has not drained water within the expected timeframe. Symptoms include water remaining in the drum post-wash, a humming sound during the drain cycle, and the display showing the error during the drain phase. Common causes include a clogged drain filter, a blocked or malfunctioning drain pump, or an obstruction in the internal drainage pathway. Addressing these issues promptly can prevent further complications.

Common Symptoms:

  • Water remains in drum after wash or rinse
  • No or slow drainage sound during drain cycle
  • Error displayed at start of or during drain/dehydration phase

Possible Causes

  • Clogged or obstructed drain filter (high)
  • Drain pump blockage or malfunction (medium)
  • Foreign object or internal drainage pathway obstruction (medium)

How to Fix Error E03

DIY Fix Check and clear drain filter

  1. Turn off and unplug the machine
  2. Open the drain filter access panel (usually at front bottom)
  3. Remove and clean out lint, hair, debris from filter
  4. Replace filter securely and run a drain/spin cycle

DIY Fix Inspect and adjust drain hose

  1. Verify drain hose is free of kinks, not crushed, and at proper height (following Sharp recommendations)
  2. Remove hose from standpipe or drain connection and run water through to clear any blockages
  3. Reinstall hose ensuring smooth routing without sharp bends

Technician Only Service or replace drain pump

  1. Disconnect power and water supply
  2. Access drain pump assembly
  3. Inspect and remove debris from pump impeller
  4. Test pump operation; replace if impeller damaged or pump fails to move water
  5. Reassemble and test machine

Parts needed: Drain pump, Pump impeller, Seals/gaskets if needed

Technician Only Clear internal drainage pathway obstruction

  1. Disconnect power and water
  2. Remove front panel or appropriate access panels
  3. Trace drainage path from tub to pump and remove lodged objects or debris
  4. Reassemble and test for proper drain
  5. Check associated seals and sensors for proper operation

Parts needed: Internal hoses/pipes, Possible replacement of damaged hose segments

🛑 When to Call a Pro:
  • Water remains after cleaning filter and hose
  • Pump hums but water not draining
  • Suspected sensor or electrical issue causing false detection

Technical Specifications

wattage 60W
component Drain Pump
resistance 5-10 ohms
part_number SHARP XH-12345
voltage_rating 120V AC

Common Questions

What does E03 error mean on Sharp Washing Machine?

E03 indicates a drainage issue, where water hasn't drained as expected, often accompanied by a humming sound.

Can I fix Sharp Washing Machine E03 error myself?

Yes, you can check and clear the drain filter and inspect the drain hose for blockages.

How much does it cost to fix E03 error?

Estimated repair costs range from $50 to $200, depending on parts and labor.

When should I call a technician for E03?

Call a technician if water remains after cleaning the filter, if the pump hums without draining, or if you suspect a sensor issue.

Sources & References

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!