Sharp Washing Machine Error E11
⚡ Quick Answer: The Sharp Washing Machine E11 error code indicates a potential drainage issue, which can prevent the machine from completing its wash cycle. Common ca... ⚠️ Difficulty Varies
What Does Error E11 Mean?
The Sharp Washing Machine E11 error code indicates a potential drainage issue, which can prevent the machine from completing its wash cycle. Common causes may include obstructions in the water inlet or drain hoses, issues with the water inlet valve, or a malfunctioning drain pump. To address this, start with basic troubleshooting like checking the hoses for kinks and ensuring that the water supply is on. If the issue persists, further diagnostics may be needed.
Possible Causes
- Clogged drain filter
- Blocked drain hose
- Faulty drain pump
How to Fix Error E11
DIY Fix Basic checks and reset
- Turn off and unplug the washing machine for at least 5 minutes, then plug back in and restart.
- Ensure the water supply is turned on and hoses are not kinked.
- Check for obvious obstructions in water inlet and drain hoses.
Technician Only Professional diagnostic
- Use service tools to read internal error registers from the machine’s control board.
- Inspect water inlet valve, water level/pressure sensors, and wiring harness for faults.
- Check drain pump and associated sensors if water level or drainage issues are suspected.
Parts needed: Water inlet valve, Water level / pressure sensor, Drain pump and hose assemblies
- If the error persists after basic reset and checks
- If there is no water filling or abnormal water flow
- If any sensors or internal electrical components need access that exposes high voltage
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E11 error mean on Sharp Washing Machine?
E11 indicates a drainage issue, preventing the machine from completing the wash cycle.
Can I fix Sharp Washing Machine E11 error myself?
Yes, you can perform basic checks like inspecting hoses and resetting the machine.
How much does it cost to fix E11 error?
Repair costs vary; sensor/valve replacement is typically moderate, while control board issues may be higher.
When should I call a technician for E11?
Call a technician if the error persists after basic checks or if internal components require access.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!