Sharp Washing Machine Error E08
⚡ Quick Answer: The Sharp Washing Machine E08 error code indicates a potential issue with the drain pump, causing the machine to stop mid-cycle or fail to drain water... ✅ DIY Fixable
What Does Error E08 Mean?
The Sharp Washing Machine E08 error code indicates a potential issue with the drain pump, causing the machine to stop mid-cycle or fail to drain water. Users may notice unusual noises or a failure during the spin cycle. To troubleshoot, try resetting the machine by unplugging it for a few minutes and ensuring the load is evenly distributed. If the problem persists, further inspection of the motor and associated components may be necessary.
Common Symptoms:
- Machine stops mid‑cycle
- Drum doesn’t spin or spin cycle fails
- Error appears shortly into wash or spin
- Possible drainage or motor interruption
Possible Causes
- Clogged drain pump
- Faulty drain pump motor
- Damaged wiring to the pump
How to Fix Error E08
DIY Fix Basic checks and reset
- Turn off the washing machine and unplug it from the power outlet.
- Wait a few minutes then plug the machine back in and power it on (try a reset).
- Ensure the load is not excessively large or unevenly distributed.
- Verify that drain hoses and filters are not blocked or kinked.
Technician Only Inspect motor and motor speed sensor
- Perform diagnostic checks on the wash motor and motor speed sensor.
- Inspect wiring harnesses and connections to the motor control board.
- Test or replace the motor speed sensor or motor if faulty.
Parts needed: Motor speed sensor, Wash motor, Wiring/connector harness
- If error persists after basic checks and reset
- If there are electrical smell, sparks, or unusual noises
- If motor or motor control requires replacement
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | SHARP 2DPS-1234 |
| voltage_rating | 120V AC |
Common Questions
What does E08 error mean on Sharp Washing Machine?
E08 indicates a drain pump malfunction, causing the machine to stop mid-cycle or fail to drain.
Can I fix Sharp Washing Machine E08 error myself?
Yes, you can try resetting the machine and checking the load distribution.
How much does it cost to fix E08 error?
Repair costs vary based on potential motor or sensor replacements, plus labor.
When should I call a technician for E08?
Call a technician if the error persists after resetting or if you notice unusual electrical smells or noises.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!