Sharp Dryer Error E00
⚡ Quick Answer: The Sharp Dryer error code E00 signifies a malfunction in the control board, which may prevent the dryer from starting or cause erratic behavior. This... ⚠️ Difficulty Varies
What Does Error E00 Mean?
The Sharp Dryer error code E00 signifies a malfunction in the control board, which may prevent the dryer from starting or cause erratic behavior. This issue typically indicates an internal fault that requires professional diagnosis and repair. If you encounter this error, it's essential to check if the dryer door is securely closed and to power cycle the unit before seeking help.
Common Symptoms:
- Error code E00 displayed on dryer panel during operation or at power‑on
Possible Causes
- Undiagnosed internal fault requiring professional diagnosis (high)
How to Fix Error E00
DIY Fix Power cycle and check basic conditions
- Turn the dryer off and unplug it from the power outlet.
- Wait 5–10 minutes to allow internal systems to reset.
- Ensure the dryer door is fully closed and controls are set correctly.
- Plug the dryer back in and attempt a restart.
Technician Only Professional diagnostic and repair
- Connect diagnostic tools to the dryer’s service interface if available.
- Check internal sensors, wiring harnesses, control board communication and power supply integrity.
- Identify and replace any failed components such as sensors or control electronics as indicated by diagnostic tests.
Parts needed: Control board, Temperature and safety sensors, Wiring harnesses
- If E00 persists after basic power cycling
- If the dryer fails to operate normally after restart
Next step
Choose the next step for E00
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E00 error mean on Sharp Dryer?
E00 indicates a control board malfunction, causing startup issues or erratic behavior.
Can I fix Sharp Dryer E00 error myself?
Yes, try power cycling the dryer and ensuring the door is closed. If the error persists, professional help is needed.
How much does it cost to fix E00 error?
Repair costs vary; control board replacement typically incurs a higher expense.
When should I call a technician for E00?
Call a technician if E00 persists after basic troubleshooting or if the dryer operates abnormally.
Sources & References
- Sharp KD‑HHH8S8GW3‑PL Automatic fault warnings (official)
- Sharp KD‑NHH9S7GW2‑EN Automatic fault warnings (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!