Sharp Dryer Error E07

⚡ Quick Answer: The Sharp dryer E07 error code indicates a malfunction in the heating element, often resulting in the dryer stopping mid-cycle or failing to start. Th... ✅ DIY Fixable

What Does Error E07 Mean?

The Sharp dryer E07 error code indicates a malfunction in the heating element, often resulting in the dryer stopping mid-cycle or failing to start. This issue can stem from a problem with the condenser pump, which may be clogged or faulty, preventing proper operation during the drying cycle.

Common Symptoms:

  • Dryer stops mid‑cycle with error code E07 displayed
  • Dryer will not start or completes few moments before fault
  • Display shows E07 without other obvious fault lights

Possible Causes

  • Condenser pump malfunction (clogged or failed) (low)

How to Fix Error E07

DIY Fix Inspect and clean condenser pump and filters

  1. Unplug the dryer from the electrical outlet.
  2. Check for blockages around the condenser pump at the rear of the dryer and remove any debris.
  3. Clean the lint filter and condenser unit according to the user manual.

Technician Only Service and replace condenser pump (if required)

  1. Verify E07 occurs consistently after cleaning and resetting the dryer.
  2. Test the condenser pump operation and electrical connections.
  3. Replace the condenser pump assembly if it fails testing.

Parts needed: Condenser pump assembly, Associated wiring harness

🛑 When to Call a Pro:
  • If the error persists after cleaning condenser and filters
  • If the condenser pump is confirmed to be faulty
  • If other symptoms such as smoke, burning smell, or electrical issues occur

Technical Specifications

wattage 2900W
component Heating Element
resistance 10-30 ohms
part_number SHARP 2900W-HEAT
voltage_rating 240V AC

Common Questions

What does E07 error mean on Sharp dryer?

E07 indicates a heating element malfunction, causing the dryer to stop mid-cycle.

Can I fix Sharp dryer E07 error myself?

Yes, you can inspect and clean the condenser pump and filters to potentially resolve the issue.

How much does it cost to fix E07 error?

Repairing the E07 error typically costs between ¥10,000 and ¥30,000 for parts and labor.

When should I call a technician for E07?

Call a technician if the error persists after cleaning or if you notice smoke or electrical issues.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!