Sharp Dryer Error E05
⚡ Quick Answer: The Sharp dryer E05 error indicates a malfunction related to the thermistor, affecting temperature sensing and potentially causing overheating or inad... ✅ DIY Fixable
What Does Error E05 Mean?
The Sharp dryer E05 error indicates a malfunction related to the thermistor, affecting temperature sensing and potentially causing overheating or inadequate heating. Common symptoms include the dryer running briefly before stopping, with the drum possibly spinning and then halting with the error displayed. Possible causes include a faulty NTC temperature sensor, issues with the condenser pump or drainage system, or a malfunctioning heating element thermostat.
Common Symptoms:
- Dryer runs briefly before stopping with E05 displayed
- Drum may spin then halt quickly with error
- No official Sharp error description found, but multiple community reports correlate E05 with sensor/pump/drainage faults
Possible Causes
- Faulty NTC temperature sensor (front/airflow) (medium)
- Condenser pump or drainage issue (medium)
- Heating element thermostat/thermal cut‑out fault (medium)
How to Fix Error E05
DIY Fix Check basic airflow and drainage
- Turn off and unplug the dryer
- Clean lint filter thoroughly
- Empty and check condenser water tank
- Inspect drain hose/tray for blockages
Technician Only Test and replace faulty sensors or components
- Unplug and remove rear panel to access sensors
- Use multimeter to test NTC temperature sensor resistance for expected values (change with temp)
- Test thermostats/cut‑outs for continuity at room temp
- Inspect and test condenser pump and drainage circuit
- Replace any faulty parts and re‑test
Parts needed: NTC temperature sensor, Thermostat / thermal cut‑out sensors, Condenser pump, Drain hose/tray components
- If error persists after basic cleaning and drainage checks
- If multimeter diagnostics show complex wiring or multiple faulty parts
- If user is not experienced with internal electrical diagnostics
Next step
Choose the next step for E05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E05 error mean on Sharp dryer?
E05 indicates a thermistor malfunction, causing the dryer to overheat or fail to heat properly.
Can I fix Sharp dryer E05 error myself?
Yes, check basic airflow and drainage, clean the lint filter, and empty the condenser water tank.
How much does it cost to fix E05 error?
Estimated repair costs range from $20 to $150 for parts, depending on the specific component.
When should I call a technician for E05?
Call a technician if the error persists after basic checks or if diagnostics reveal complex issues.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!