Samsung Oven Error U

⚡ Quick Answer: U means Samsung Oven error U indicates a malfunction in the temperature sensor, often resulting in inaccurate temperature readin... This is typically a DIY fix.

What Does Error U Mean?

Samsung Oven error U indicates a malfunction in the temperature sensor, often resulting in inaccurate temperature readings or failure to heat.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor

    Remove the oven's back panel to access the temperature sensor. Check for any visible damage or loose connections.

    Ensure the oven is completely cool before starting.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, measure the resistance of the temperature sensor. It should typically read between 1000-1100 ohms at room temperature.

    If the reading is outside this range, the sensor may need replacement.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, disconnect it and replace it with a new one. Reassemble the back panel and ensure all screws are tightened.

    Use a genuine Samsung replacement part for best results.

How to Reset

To reset the error U, turn off the oven at the circuit breaker for 5 minutes, then restore power and check if the error persists.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number DG32-00018A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the Samsung Oven error U myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How long will it take to fix the error U?

The repair should take approximately 30-45 minutes, depending on your experience.

What causes the Samsung Oven error U to appear?

This error is typically caused by a malfunctioning temperature sensor or a disconnection in its wiring.

Should I call a professional for error U?

If you're uncomfortable working with electrical components or if the issue persists after replacement, it's best to consult a professional.

When should I consider replacing the temperature sensor?

If testing shows that the sensor is out of the normal resistance range, it should be replaced to resolve error U.

User Comments (0)

Share your experience or solution below.

Be the first to comment!