Samsung Oven Error C-22
⚡ Quick Answer: The Samsung Oven error code C-22 indicates a malfunction in the internal temperature sensing system. This error typically arises from a defective oven... ⚠️ Difficulty Varies
What Does Error C-22 Mean?
The Samsung Oven error code C-22 indicates a malfunction in the internal temperature sensing system. This error typically arises from a defective oven temperature sensor, leading to incorrect temperature readings and failure to heat properly. During operation, you may notice a buzzing sound, and the oven may struggle to complete preheating or baking cycles. Addressing this issue often involves inspecting and potentially replacing the temperature sensor or diagnosing control board malfunctions.
Common Symptoms:
- Error C-22 appears on the oven display either at startup or during a cooking cycle.
- Oven fails to complete preheat or bake cycle.
- Oven temperature may not be correctly read or controlled.
Possible Causes
- Defective oven temperature sensor (shorted or abnormally low resistance). (high)
- Wiring fault between the temperature sensor and main control board. (medium)
- Control board misinterpretation due to a faulty PCB or connector issue. (medium)
How to Fix Error C-22
DIY Fix Power Reset and Basic Check
- Turn the oven off and disconnect it from power (unplug or switch off at breaker) for at least 60 seconds.
- After reconnecting power, try to restart the oven to see if the code clears (useful if caused by transient electrical glitch).
- Ensure oven vents are not obstructed and the oven cavity is cool before further steps.
Technician Only Inspect and Replace Temperature Sensor if Faulty
- Disconnect power at the breaker and allow the oven to cool.
- Access the oven’s rear/side panel to locate the oven temperature sensor.
- Visually inspect the sensor and its wiring for damage (burn marks, melted insulation, pinched wires).
- Test the sensor’s resistance with a multimeter; if resistance is below specification or fluctuates, replace the sensor.
- Check wiring continuity from the sensor to the main control board and repair or replace any damaged harness.
- Reassemble and test the oven; clear stored codes if applicable.
Parts needed: Oven temperature sensor, Wiring harness (if damaged)
Technician Only Control Board Diagnosis/Replacement
- If sensor and wiring test within specification, evaluate the main control board’s inputs and connectors for faults.
- Inspect for signs of damage or corrosion on the PCB; re‑seat or replace connectors if needed.
- Replace main control board only if sensor and wiring checks are confirmed good but C‑22 persists.
Parts needed: Oven main control board
- If after basic power reset the C‑22 error reappears consistently.
- If you are not comfortable safely accessing internal oven components.
- If multimeter testing of sensor and wiring is inconclusive or beyond user capability.
Next step
Choose the next step for C-22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does C-22 error mean on Samsung Oven?
C-22 indicates a malfunction in the oven's temperature sensing system, often due to a faulty temperature sensor.
Can I fix Samsung Oven C-22 error myself?
Yes, you can try a power reset and check for vent obstructions. If the error persists, further inspection may be needed.
How much does it cost to fix C-22 error?
Repair costs for the C-22 error range from $40 to $150, depending on the sensor and labor costs.
When should I call a technician for C-22?
Call a technician if the error reappears after a reset, or if you're uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!