Samsung Oven Error C-23
⚡ Quick Answer: The Samsung oven error C-23 indicates a malfunction related to the meat probe or temperature sensor. This error typically appears when the oven fails ... ✅ DIY Fixable
What Does Error C-23 Mean?
The Samsung oven error C-23 indicates a malfunction related to the meat probe or temperature sensor. This error typically appears when the oven fails to heat properly, and you may hear unusual clicking sounds. The issue often arises from an open or shorted meat probe circuit or a temperature sensor that is out of range. Resolving this problem may involve checking the meat probe connection or resetting the oven's power.
Common Symptoms:
- Error C‑23 shown on display during operation
- Oven may fail to cook properly
- Meat probe reading not functioning or sensor out‑of‑range
Possible Causes
- Meat probe circuit open or shorted (medium)
- Temperature sensor out of range or sensor circuit issue (low)
How to Fix Error C-23
DIY Fix Check and Reseat Meat Probe
- Ensure oven is off and cool
- Locate meat probe and its connector
- Disconnect and reconnect the probe to ensure a good contact
- Try using the oven again to see if the code clears
DIY Fix Power Reset Oven
- Turn off oven via power switch or breaker
- Wait ~60 seconds
- Restore power and attempt a bake to see if code reoccurs
Technician Only Test Meat Probe and Wiring
- Remove and test meat probe resistance against spec
- Inspect wiring from probe to control board for opens/shorts or corrosion
- Replace faulty probe or repair wiring
Parts needed: Meat probe assembly, Wiring harness
Technician Only Inspect Oven Temperature Sensor Circuit
- Measure temperature sensor circuit resistance
- Compare to manufacturer specifications
- Replace sensor if out of range
Parts needed: Oven temperature sensor
- If error persists after basic user checks and reset
- If meat probe or temperature sensor tests confirm faults requiring replacement
- If internal wiring or control board faults suspected
Next step
Choose the next step for C-23
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does C-23 error mean on Samsung oven?
C-23 error indicates a fault with the meat probe or temperature sensor, leading to improper heating.
Can I fix Samsung oven C-23 error myself?
Yes, you can check and reseat the meat probe or reset the oven's power to troubleshoot the error.
How much does it cost to fix C-23 error?
Repair costs range from $30 to $120 for the meat probe; additional costs may apply if wiring repairs are needed.
When should I call a technician for C-23?
Call a technician if the error persists after DIY checks or if replacement parts are necessary.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!