Samsung Oven Error E-2A

⚡ Quick Answer: E-2A means Samsung Oven error E-2A indicates a malfunction in the heating element, often accompanied by a failure to heat or unusua... This is typically a DIY fix.

What Does Error E-2A Mean?

Samsung Oven error E-2A indicates a malfunction in the heating element, often accompanied by a failure to heat or unusual clicking sounds during operation.

Common Causes

  • Heating Element (60% likelihood)
  • Temperature Sensor (30% likelihood)
  • Control Board (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Heating Element

    Visually check the heating element for any signs of damage or burn marks. If damaged, it will need replacement.

    Make sure to note the model number for the correct replacement part.

  2. Step 2: Test the Heating Element

    Use a multimeter to check the resistance of the heating element. It should read between 10-30 ohms. If it reads infinite, it is faulty.

    Replace the heating element if the reading is outside the expected range.

  3. Step 3: Check the Temperature Sensor

    Locate the temperature sensor and test it with a multimeter. It should show resistance according to the manufacturer's specifications. If not, replace it.

    Ensure the sensor is properly connected to the control board.

  4. Step 4: Examine the Control Board

    Inspect the control board for any visible damage or burnt components. If found, the control board may need replacement.

    Document any error codes displayed on the control board for reference.

How to Reset

To reset the E-2A error, turn off the oven for 5 minutes and then turn it back on. If the error persists, further repairs are needed.

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number DG94-01012A
voltage_rating 240V AC

Frequently Asked Questions

Can I replace the heating element myself?

Yes, if you have basic tools and follow safety precautions, you can replace the heating element.

How much does it cost to fix error E-2A?

The cost can vary, but replacing the heating element typically ranges from $50 to $150, depending on the model.

What causes the E-2A error in Samsung ovens?

The E-2A error is primarily caused by a malfunctioning heating element or temperature sensor.

Should I call a technician for error E-2A?

If you're uncomfortable with electrical repairs or the issue persists after replacing parts, it's best to call a professional.

When should I consider replacing my oven?

If multiple components are failing or the repair costs exceed half the price of a new oven, it may be time to consider replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!