Samsung Oven Error E-28

⚡ Quick Answer: E-28 means Samsung Oven error E-28 indicates a malfunction in the heating element, often accompanied by an inability to heat or unu... This is typically a DIY fix.

What Does Error E-28 Mean?

Samsung Oven error E-28 indicates a malfunction in the heating element, often accompanied by an inability to heat or unusual clicking sounds during operation.

Common Causes

  • Heating Element (50% likelihood)
  • Temperature Sensor (30% likelihood)
  • Control Board (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Heating Element

    Remove the oven's bottom panel and visually inspect the heating element for any signs of damage or breakage. Use a multimeter to check for continuity.

    If the element is damaged, it will need to be replaced.

  2. Step 2: Check the Temperature Sensor

    Locate the temperature sensor inside the oven cavity. Disconnect it and test its resistance with a multimeter. It should read between 1000-1100 ohms at room temperature.

    Replace the sensor if readings are outside this range.

  3. Step 3: Examine the Control Board

    Access the control board by removing the back panel of the oven. Look for any burnt components or loose connections. If found, repair or replace the board as necessary.

    This step may require professional assistance if you're not comfortable with electronics.

How to Reset

To reset the error, turn off the oven at the circuit breaker for 5 minutes, then turn it back on. If the error persists, further inspection is needed.

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number DG47-00020A
voltage_rating 240V AC

Frequently Asked Questions

Can I fix the E-28 error myself?

Yes, if you have basic electrical skills and tools, you can troubleshoot and replace the heating element or temperature sensor.

How long will it take to repair the E-28 error?

The repair process typically takes about 45-60 minutes, depending on the issue.

What causes the Samsung Oven E-28 error?

The error is usually caused by a malfunctioning heating element, temperature sensor, or control board.

Should I replace the heating element if I see error E-28?

Yes, if the heating element shows signs of damage or if testing confirms it's faulty, it should be replaced.

When should I call a professional for error E-28?

If you're uncomfortable working with electrical components or if the control board needs replacement, it's best to call a professional.

User Comments (0)

Share your experience or solution below.

Be the first to comment!