Miele Washing Machine Error WSA

⚡ Quick Answer: The Miele Washing Machine error code WSA indicates a potential issue with the water inlet valve. This error may manifest as a failure to fill with wat... ✅ DIY Fixable

What Does Error WSA Mean?

The Miele Washing Machine error code WSA indicates a potential issue with the water inlet valve. This error may manifest as a failure to fill with water or unusual sounds during operation. To address the WSA error, users should ensure the water supply is open and hoses are not kinked, and perform a basic reset by unplugging the machine for a few minutes. If the error persists, further diagnosis may be required.

Possible Causes

  • Water Inlet Valve
  • Water Supply Issues
  • Faulty Wiring

How to Fix Error WSA

DIY Fix Confirm exact displayed code and check manual

  1. Ensure that the error code displayed is exactly "WSA" and not a sequence containing numbers or F‑style code (e.g., FXX).
  2. Refer to the model‑specific operating manual (e.g., Miele WSA 123 manual) to see if a similar code is listed under display messages.
  3. Try pressing the display/info button (if applicable) to reveal a numerical error code behind symbols or indicators, as some Miele machines hide codes under service display modes.

DIY Fix Basic checks & reset

  1. Turn off the washing machine and unplug it from power for several minutes.
  2. Ensure water supply is open and hoses are not kinked.
  3. Restart the machine and observe whether any numerical error code reappears.
  4. Check that the door/lid is firmly closed and latched before restarting cycles.

Technician Only Contact Miele service or authorized technician with detailed code info

  1. Provide the technician with the exact mode of display (symbols, lights, or text) and any pattern seen when toggling the service display.
  2. Ask them to read the internal diagnostic code stored in the machine’s control module.
  3. Have them consult the official Miele service documentation specific to the machine’s serial and model number.
🛑 When to Call a Pro:
  • If the error persists after basic resets.
  • If the display cannot be converted to a recognized numerical code.
  • If any water leakage or unusual noises accompany the code.

Next step

Choose the next step for WSA

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 500-1500 ohms
part_number Miele 6101100
voltage_rating 120V AC

Common Questions

What does WSA error mean on Miele Washing Machine?

WSA indicates a problem with the water inlet valve, often leading to filling issues.

Can I fix Miele Washing Machine WSA error myself?

Yes, check the water supply, hoses, and perform a reset by unplugging the machine.

How much does it cost to fix WSA error?

Repair costs vary based on service call and diagnostics; contact a technician for an estimate.

When should I call a technician for WSA?

Call a technician if the error persists after resets or if you notice water leakage or unusual noises.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318