Miele Washing Machine Error F02
⚡ Quick Answer: The Miele washing machine error F02 indicates a fault related to the heating or water temperature sensor circuit. This issue often leads to the wash c... ⚠️ Difficulty Varies
What Does Error F02 Mean?
The Miele washing machine error F02 indicates a fault related to the heating or water temperature sensor circuit. This issue often leads to the wash cycle stopping prematurely and may be accompanied by a loud humming sound. If the error persists, a professional service is required to diagnose and repair the temperature sensor or related components.
Common Symptoms:
- Error F02 (or F2) displayed during wash cycle
- Wash cycle stops prematurely
- Machine may fail to heat water
Possible Causes
- Open circuit or fault in heating/water temperature sensor (NTC) circuit (medium)
- Faulty temperature sensor (NTC) or related wiring connection issue (medium)
How to Fix Error F02
DIY Fix Basic checks before service call
- Power off and unplug the washer for 5–10 minutes then power back on to see if the code clears
- Ensure that the machine has proper water supply and loading (normal use conditions)
- Do not attempt internal electrical repairs
Technician Only Diagnose and repair temperature sensor circuit fault
- Inspect and test the NTC temperature sensor for open/short circuits using a multimeter
- Check the wiring harness and connectors between the temperature sensor and control board for damage or poor contacts
- Replace the faulty NTC sensor or repair/replace damaged wiring as needed
- Verify heating element circuit integrity if linked to sensor fault
- Test run after repair
Parts needed: NTC temperature sensor, Wiring harness/connectors, Possibly heating element assembly
- Error persists after power cycle
- Machine stops mid‑cycle with F02/F2 repeatedly
- Heating or wash temperature regulation fails
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Miele 6100130 |
| voltage_rating | 230V AC |
Common Questions
What does F02 error mean on Miele washing machine?
F02 indicates a fault with the heating or water temperature sensor circuit, causing the wash cycle to stop prematurely.
Can I fix Miele washing machine F02 error myself?
You can try power cycling the machine and checking the water supply, but internal repairs should be left to professionals.
How much does it cost to fix F02 error?
The estimated repair cost for F02 error ranges from ¥15,000 to ¥50,000, depending on your region and labor.
When should I call a technician for F02?
Call a technician if the error persists after a power cycle or if the machine stops mid-cycle repeatedly.
Sources & References
- Miele UK Support – Fault F2 (official)
- Miele DE Support – Fehler F2 (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!