Miele Washing Machine Error F06

⚡ Quick Answer: The Miele washing machine error F06 indicates a water inlet or water level detection fault. This error occurs when the machine fails to detect the exp... ✅ DIY Fixable

What Does Error F06 Mean?

The Miele washing machine error F06 indicates a water inlet or water level detection fault. This error occurs when the machine fails to detect the expected rise in water level during the fill cycle, often resulting in unusual sounds and an early abort of the filling process. Common causes include insufficient water supply due to restrictions or inlet issues, as well as faults in the pressure sensor or its wiring.

Common Symptoms:

  • F06 (often shown as F6 on some model displays)
  • Simultaneous LED or display message "Zulauf prfen" (check water inlet)
  • Machine aborts early during fill stage due to insufficient water rise

Possible Causes

  • Insufficient water detected during fill due to a restriction or inlet issue (medium)
  • Pressure (water level) sensor fault or wiring issue (medium)
  • Kinked/blocked inlet hose or insufficient water supply pressure (medium)

How to Fix Error F06

DIY Fix Check water supply and inlet conditions

  1. Ensure the water tap supplying the washer is fully open.
  2. Check the inlet hoses for kinks, bends, or visible blockages.
  3. Verify that household water pressure is adequate.
  4. Restart the washer and attempt a new cycle.

Technician Only Inspect and test pressure (water level) sensor and wiring

  1. Disconnect power and access the internal pressure sensor and its hose.
  2. Check the sensor hose for blockages or damage.
  3. Test the pressure sensor and circuit with appropriate diagnostic tools.
  4. Repair or replace the pressure sensor and/or wiring harness as needed.

Parts needed: pressure sensor, pressure sensor hose, wiring harness

🛑 When to Call a Pro:
  • If after checking inlet hoses and water supply the error persists.
  • If internal pressure sensor diagnostics indicate fault or wiring damage.
  • If the washer continues to repeatedly abort fill cycles with F06.

Technical Specifications

wattage 80W
component Drain Pump
resistance 30-50 ohms
part_number Miele 6120010
voltage_rating 230V AC

Common Questions

What does F06 error mean on Miele washing machine?

F06 indicates a water inlet or level detection fault, causing the machine to abort filling.

Can I fix Miele washing machine F06 error myself?

Yes, check water supply, inlet hoses for kinks, and ensure adequate water pressure.

How much does it cost to fix F06 error?

Repair costs are generally low to moderate, depending on the specific issues.

When should I call a technician for F06?

Call a technician if the problem persists after checking hoses or if diagnostics indicate a sensor fault.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!