Miele Washing Machine Error F64
⚡ Quick Answer: The Miele washing machine F64 error indicates a malfunction in the magnetic field sensor, which affects motor operation and prevents the machine from ... ⚠️ Difficulty Varies
What Does Error F64 Mean?
The Miele washing machine F64 error indicates a malfunction in the magnetic field sensor, which affects motor operation and prevents the machine from draining water. This issue may lead to unusual noises and hinder the wash cycle from progressing. It's crucial to address this fault promptly to restore normal function.
Common Symptoms:
- Error F64 displayed on the control panel
- Machine may not start or continue wash cycle
- Motor rotation or speed monitoring issue
Possible Causes
- Magnetic field sensor fault (high)
- Signal interruption between sensor and control module (medium)
How to Fix Error F64
DIY Fix Initial checks and reset
- Turn off and unplug the washing machine for at least 5 minutes.
- Plug in and power on to see if code clears.
Technician Only Inspect and service magnetic field sensor
- Disconnect power and access the motor and sensor assembly.
- Check wiring harness and connectors between the magnetic field sensor and control board for continuity and secure connection.
- Measure sensor resistance with a multimeter to confirm functionality.
- Replace faulty magnetic field sensor if out of specification.
- Verify control board input from sensor and replace control board if needed.
Parts needed: Magnetic field sensor, Motor harness connectors, Control board (if required)
- If F64 persists after resetting power
- If any inspection requires opening the machine’s cabinet or testing internal components
- If user is not familiar with electrical safety procedures
Next step
Choose the next step for F64
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F64 error mean on Miele washing machine?
F64 indicates a fault in the magnetic field sensor, affecting motor operation and water drainage.
Can I fix Miele washing machine F64 error myself?
You can attempt a reset by unplugging the machine for 5 minutes, but further issues may require professional help.
How much does it cost to fix F64 error?
Repair costs typically range from $150 to $450, depending on the model and region.
When should I call a technician for F64?
Call a technician if the error persists after a reset, or if you need to inspect internal components safely.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!