Miele Washing Machine Error F62
⚡ Quick Answer: The Miele washing machine F62 error indicates a problem with the programme selector, either being set between positions or malfunctioning. This can re... ✅ DIY Fixable
What Does Error F62 Mean?
The Miele washing machine F62 error indicates a problem with the programme selector, either being set between positions or malfunctioning. This can result in the washer not responding to cycle selections, unusual sounds during operation, and failure to complete wash cycles. Ensuring the selector is fully engaged in a defined position is crucial for proper function.
Common Symptoms:
- Error F62 displayed on control panel
- Washer not responding to cycle selection
- Programmes not starting or running correctly
Possible Causes
- Programme selector (drehwahlschalter) is not in a defined position or is defective (high)
- Faulty or poor electrical connection at the programme selector (medium)
How to Fix Error F62
DIY Fix Reset and check programme selector position
- Turn off the washing machine and unplug it from power
- Wait ~5 minutes then plug back in and turn on
- Ensure the programme selector dial is fully in a defined programme position, not between settings
Technician Only Inspect and service programme selector assembly
- Remove control panel to access programme selector
- Inspect for mechanical wear or damage to the selector
- Test electrical continuity and connector security between selector and control board
- Clean contacts or replace selector if defective
Parts needed: Programme selector switch/dial, Electrical connectors/wiring harness
- Error persists after correct selector positioning and reset
- Evidence of mechanical damage to selector or wiring
Next step
Choose the next step for F62
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F62 error mean on Miele washing machine?
F62 indicates a programme selector issue, causing the washer to be unresponsive and unable to complete cycles.
Can I fix Miele washing machine F62 error myself?
Yes, you can reset the machine and ensure the programme selector is in a defined position.
How much does it cost to fix F62 error?
Repair costs for the F62 error typically range from $50 to $200 for parts, depending on the model.
When should I call a technician for F62?
Call a technician if the error persists after resetting or if there is visible damage to the selector or wiring.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!