Miele Washing Machine Error F49
⚡ Quick Answer: The Miele washing machine error F49 indicates a malfunction in the door lock mechanism and a potential issue with the electronic control module. This ... ✅ DIY Fixable
What Does Error F49 Mean?
The Miele washing machine error F49 indicates a malfunction in the door lock mechanism and a potential issue with the electronic control module. This error can prevent the machine from starting and may cause unusual clicking sounds during operation. If this error appears, the machine may stop mid-cycle, signaling a need for attention to the electronics and wiring connections.
Common Symptoms:
- Error F49 displayed on the control panel
- Appliance may stop mid‑cycle
Possible Causes
- Electronic control module malfunction (high)
- Faulty electronic connections or damaged wiring (medium)
How to Fix Error F49
DIY Fix Basic checks and service contact
- Turn off the washer and disconnect from power.
- Check that there are no obvious loose cables or damaged connections around the machine’s access panels (do not open sealed control module covers).
- Contact an authorized Miele service technician to inspect electronics and schedule repair.
Technician Only Diagnose and repair control electronics
- Power off and isolate the machine from electrical supply.
- Access the electronic control module according to service manual procedures.
- Inspect all control board connections and wiring for damage or corrosion.
- Test control board components (relays, connectors, traces) for faults.
- Replace or repair the faulty electronic module as required.
- Verify repair by running diagnostic and wash cycles.
Parts needed: Electronic control board/module, Connectors/wiring harness
- After basic power reset and visual cable check without resolution
- If error persists on restart
Next step
Choose the next step for F49
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5W |
|---|---|
| component | Door Lock Assembly |
| resistance | 0-5 ohms |
| part_number | Miele 6101001 |
| voltage_rating | 230V AC |
Common Questions
What does F49 error mean on miele washing machine?
The F49 error indicates a malfunction in the door lock mechanism and potential electronic control issues.
Can I fix miele washing machine F49 error myself?
Yes, you can check for loose cables and perform a basic power reset before contacting a technician.
How much does it cost to fix F49 error?
Repair costs typically range from €150 to €500+, depending on the module and labor.
When should I call a technician for F49?
Call a technician if the error persists after a power reset and visual inspection.
Sources & References
- Miele support Fault F49 (USA) (official)
- Miele support Fehler F49 (Germany) (official)
- Repartly guide to Miele F49 electronic error (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!