Miele Washing Machine Error F27

⚡ Quick Answer: The Miele washing machine error F27 indicates a drainage issue caused by water detected on the base plate, often due to leaks in internal hoses, the d... ✅ DIY Fixable

What Does Error F27 Mean?

The Miele washing machine error F27 indicates a drainage issue caused by water detected on the base plate, often due to leaks in internal hoses, the detergent tray, or seals. This error can halt the wash cycle and display unusual sounds during operation as the waterproof system triggers the safety mechanism. Immediate action is required to address the water accumulation and prevent further damage.

Common Symptoms:

  • Machine detects water in the base or tray
  • Display shows F27 and wash cycle may stop shortly after start
  • Water may drain immediately or machine stops mid‑cycle

Possible Causes

  • Water present on the machine’s base plate, triggering the waterproof/drip tray sensor (medium)
  • Leak within internal hoses, detergent tray, or seals causing water to accumulate in the base (medium)

How to Fix Error F27

DIY Fix Check for external leaks and remove standing water

  1. Unplug the washing machine from power.
  2. Inspect under and around the machine for water leakage.
  3. Carefully tip the machine back slightly to drain any water from the base tray.
  4. Allow the machine to dry for 24 hours before attempting to restart.

Technician Only Inspect waterproof system and replace leaking components

  1. Remove access panels to inspect the waterproof/drip tray and sensors for water residue.
  2. Check internal hoses, seals, detergent dispenser outlets, and tub gaskets for leaks.
  3. Replace any worn hoses, seals, or clamps that are leaking.
  4. Verify proper drainage and absence of residual water that could re‑trigger F27.

Parts needed: Drip tray sensor / waterproof system sensor, Internal water hoses and clamps, Seals and gaskets

🛑 When to Call a Pro:
  • If you cannot locate the source of the leak
  • If the waterproof base sensor continues to detect water after drying
  • If internal components like sensors or electronics are suspected damaged

Technical Specifications

wattage 30W
component Drain Pump
resistance 5-15 ohms
part_number Miele 6101230
voltage_rating 230V AC

Common Questions

What does F27 error mean on Miele washing machine?

F27 indicates a drainage issue, with water detected in the base plate, often leading to a halted wash cycle.

Can I fix Miele washing machine F27 error myself?

Yes, you can check for external leaks, remove standing water, and inspect under the machine for drainage issues.

How much does it cost to fix F27 error?

The estimated repair cost ranges from €100 to €300, depending on the components that need replacement.

When should I call a technician for F27?

Call a technician if you can't locate the leak, if the waterproof base sensor still detects water after drying, or if internal components are damaged.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!