Miele Washing Machine Error F23
⚡ Quick Answer: The Miele washing machine error F23 indicates a potential failure in the drainage system, often accompanied by a drain icon on the display or unusual ... ✅ DIY Fixable
What Does Error F23 Mean?
The Miele washing machine error F23 indicates a potential failure in the drainage system, often accompanied by a drain icon on the display or unusual sounds during operation. This error may stem from issues with water supply or sensor malfunctions. Basic troubleshooting includes checking water supply valves, ensuring hoses are free of kinks, and inspecting filters for debris. If the issue persists, further diagnostics may be necessary to identify faulty components.
Possible Causes
- Blocked drain filter
- Faulty drain pump
- Kinked drain hose
How to Fix Error F23
DIY Fix Check for potential water supply or sensors issues (general)
- Ensure the washer’s water supply valves are fully open and hoses are not kinked.
- Turn off and unplug the machine, wait a few minutes, and restart to see if the display clears.
- Inspect accessible filters at the water inlet for debris.
- Check drain pump filter and hoses for blockage.
Technician Only Perform diagnostics due to undefined F23 code
- Use the washer’s service diagnostic mode (if available) to read any logged faults.
- Check water inlet valve operation and pressure switch / water level sensor.
- Inspect and test the heater temperature sensor/thermistor and wiring continuity.
- Evaluate the control board for unexpected fault registers or damage.
Parts needed: pressure switch or water level sensor, temperature sensor / thermistor, water inlet valve
- If the error persists after basic supply and reset checks
- If internal sensors or wiring faults are suspected
- If water leakage or safety-related issues are present
Next step
Choose the next step for F23
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Miele 6101010 |
| voltage_rating | 230V AC |
Common Questions
What does F23 error mean on Miele washing machine?
The F23 error indicates a possible failure in the drainage system, often related to water supply or sensor issues.
Can I fix Miele washing machine F23 error myself?
Yes, check water supply valves, ensure hoses are not kinked, and inspect filters for debris.
How much does it cost to fix F23 error?
Repair costs for the F23 error range from $100 to $300, depending on the necessary parts.
When should I call a technician for F23?
Call a technician if the error persists after basic checks, or if you suspect internal sensor or wiring faults.
Sources & References
- Forum discussion about Miele washer F23 error (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!