Miele Washing Machine Error F213
⚡ Quick Answer: The Miele Washing Machine F213 error indicates a malfunction in the TwinDos system, specifically a short circuit in the thermocouple/platinum sensor a... ✅ DIY Fixable
What Does Error F213 Mean?
The Miele Washing Machine F213 error indicates a malfunction in the TwinDos system, specifically a short circuit in the thermocouple/platinum sensor associated with container 2. This error disables the automatic detergent dosing feature, prompting users to switch to manual detergent dispensing. Users may also notice unusual noises during the drain cycle, signaling issues with the drain pump.
Common Symptoms:
- Error F213 displayed on the machine
- TwinDos dosing unavailable or disabled
- Machine suggests using manual detergent dosing
Possible Causes
- Short‑circuit in the TwinDos thermocouple/platinum sensor (container 2) (high)
- TwinDos system malfunction due to electronics/sensor issues (medium)
How to Fix Error F213
DIY Fix Bypass TwinDos and use manual detergent dosing
- Acknowledge the error and understand that the TwinDos system may not function correctly.
- Load the washer and dispense detergent manually in the detergent drawer as you would with a machine without TwinDos.
- Continue the wash cycle, as the machine can operate without TwinDos dosing when this error appears.
Technician Only Diagnose and repair/replace TwinDos sensor or electronics
- Power off and disconnect the machine from mains supply.
- Access the TwinDos assembly and related electronics per the model’s service manual.
- Test the thermocouple/platinum sensor and associated wiring for short circuits or damage.
- Repair or replace the defective TwinDos sensor or electronic control module as appropriate.
Parts needed: TwinDos thermocouple/platinum sensor, Associated wiring and connectors, Electronic control unit (if needed)
- If the F213 error persists after manual dosing, shut off the machine and contact Miele service.
- If there are additional error codes or signs of broader failure (e.g., electrical smell, smoke).
Next step
Choose the next step for F213
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 80W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-20 ohms |
| part_number | Miele 6101230 |
| voltage_rating | 230V AC |
Common Questions
What does F213 error mean on Miele Washing Machine?
F213 indicates a malfunction in the TwinDos system, specifically a short circuit in the thermocouple for container 2.
Can I fix Miele Washing Machine F213 error myself?
Yes, you can bypass TwinDos by using manual detergent dosing. Load the washer and dispense detergent in the drawer.
How much does it cost to fix F213 error?
Repair costs for the F213 error typically range from $100 to $300+, depending on parts and labor.
When should I call a technician for F213?
Call a technician if the F213 error persists after manual dosing or if you notice additional error codes or signs of failure.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!