Miele Washing Machine Error F19
⚡ Quick Answer: The Miele washing machine error F19 indicates a problem with water flow impacting the drain pump's operation. This error typically results in the wash... ✅ DIY Fixable
What Does Error F19 Mean?
The Miele washing machine error F19 indicates a problem with water flow impacting the drain pump's operation. This error typically results in the washer stopping mid-cycle and the drum failing to spin properly. It may be linked to a slow or insufficient water flow due to clogged inlet filters or hoses, leading to rotation complications. Addressing the issue requires checking water supply valves and cleaning inlet filters to ensure smooth water entry.
Common Symptoms:
- Washer stops mid‑cycle
- Drum fails to spin properly or rotation is interrupted
- Error F19 displayed on panel
Possible Causes
- Slow or insufficient water flow causing rotation issues (high)
- Clogged or restricted water inlet (filters/hoses) leading to slow water entry (medium)
How to Fix Error F19
DIY Fix Basic water flow checks
- Ensure both water supply valves are fully open
- Check inlet hoses for kinks, bends, or visible damage
- Turn off water, disconnect hoses, and clean inlet filters
DIY Fix Household water supply evaluation
- Verify home water pressure is adequate
- Check if other fixtures have low pressure, which might indicate plumbing issues
Technician Only Inspect and repair/replace flow meter
- Technician inspects the flow meter for stiffness or failure
- Replace the flow meter if found defective
- Test water flow and drum rotation after replacement
Parts needed: Flow meter / volume sensor
Technician Only Inspect water inlet valve and internal components
- Check the water inlet valve for proper function
- Test electrical signals and valve operation
- Replace valve if it’s not opening fully
Parts needed: Water inlet valve
- If error persists after basic inlet filter and hose checks
- If flow meter appears stiff or internal fault indication remains
- If water pressure checks are inconclusive or show normal levels but F19 continues
Next step
Choose the next step for F19
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Miele 6100012 |
| voltage_rating | 230V AC |
Common Questions
What does F19 error mean on Miele washing machine?
F19 indicates a water flow issue affecting the drain pump, causing the washer to stop mid-cycle.
Can I fix Miele washing machine F19 error myself?
Yes, you can check water supply valves, inspect hoses for kinks, and clean inlet filters.
How much does it cost to fix F19 error?
Estimated repair costs range from $100 to $300, depending on parts and labor.
When should I call a technician for F19?
Call a technician if the error persists after basic checks or if internal components appear faulty.
Sources & References
- Miele USA Fault F19 – Flow Meter Stiff (official)
- Miele Deutschland F19 Technical Fault Flow Meter (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!