Miele Washing Machine Error F10

⚡ Quick Answer: The Miele washing machine error F10 signifies a water intake fault, indicating that water is either blocked or not entering the machine properly. This... ✅ DIY Fixable

What Does Error F10 Mean?

The Miele washing machine error F10 signifies a water intake fault, indicating that water is either blocked or not entering the machine properly. This often results in the washer failing to fill with water, preventing the wash cycle from starting. Users may notice a corresponding water level warning on the display or hear unusual sounds during the initial water fill phase. Common causes include a shutoff water supply, low water pressure, a clogged inlet filter, or a kinked inlet hose.

Common Symptoms:

  • Washer fails to fill with water within expected time
  • Wash cycle stops or does not start due to lack of water
  • Display shows F10 when attempting to start or during initial water fill phase

Possible Causes

  • Water supply shutoff or low water pressure (high)
  • Clogged or dirty inlet filter (high)
  • Kinked or damaged inlet hose (high)
  • Faulty water inlet valve (medium)

How to Fix Error F10

DIY Fix Check and restore water supply

  1. Ensure the water tap supplying the washer is fully open.
  2. Verify that the home water pressure is adequate (Miele suggests at least 5 liters in 15 seconds).
  3. Check that the inlet hose is free of kinks, twists, or loops.

DIY Fix Clean the inlet filter

  1. Turn off the water supply to the washer.
  2. Unscrew the inlet hose from the water supply.
  3. Remove and rinse the plastic inlet filter to clear debris.
  4. Reinstall the filter and hose, then turn the water supply back on.

Technician Only Inspect or replace the water inlet valve

  1. Test the inlet valve solenoids for continuity and proper operation.
  2. Replace the water inlet valve assembly if found to be faulty.
  3. Verify water flow resumes correctly after valve replacement.

Parts needed: water inlet valve assembly

🛑 When to Call a Pro:
  • If error persists after cleaning filters and checking water supply and hoses
  • If water inlet valve tests show no proper operation
  • If water pressure is adequate but machine still fails to fill

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number Miele 6101234
voltage_rating 230V AC

Common Questions

What does F10 error mean on Miele washing machine?

F10 error indicates a water intake fault, often caused by issues like low water pressure or a clogged inlet filter.

Can I fix Miele washing machine F10 error myself?

Yes, you can check the water supply, clean the inlet filter, and inspect the inlet hose for kinks.

How much does it cost to fix F10 error?

Repair costs for the F10 error range from ¥8,000 to ¥25,000, depending on the region and model.

When should I call a technician for F10?

Call a technician if the error persists after cleaning filters, checking hoses, or if the inlet valve is faulty.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!