Miele Washing Machine Error F07
⚡ Quick Answer: The Miele washing machine error code F07 indicates a drainage failure, typically caused by a malfunctioning drain pump or a blockage in the drainage s... ✅ DIY Fixable
What Does Error F07 Mean?
The Miele washing machine error code F07 indicates a drainage failure, typically caused by a malfunctioning drain pump or a blockage in the drainage system. This error is often accompanied by symptoms such as the machine stopping mid-cycle, water remaining in the drum after the wash, and the drain cycle starting without a drop in water level. Addressing this issue may require inspecting and clearing blockages or servicing the drain pump.
Common Symptoms:
- Machine stops mid‑cycle and displays F07
- Water remains in drum after wash/rinse
- Drain cycle appears to start but water level doesn’t drop
Possible Causes
- Drainage system blocked or restricted (medium)
- Faulty or jammed drain pump (medium)
How to Fix Error F07
DIY Fix Check and clear simple drainage blockages
- Power off and unplug the machine
- Locate and clean the drain filter (usually at front bottom hatch) to remove debris
- Inspect drain hose for kinks, high loops, or clogs and straighten/clear as needed
- Restart machine and attempt a short drain/spin cycle
Technician Only Inspect and service drain pump and internal drainage system
- Disconnect power and access internal drain pump
- Remove blockages from pump impeller and housing
- Test pump operation with multimeter and replace if failed
- Inspect pressure/level sensor and pressure hose for faults as they can misreport water level
- Reassemble and test drainage cycle
Parts needed: Drain pump assembly, Pump filter, Pressure/level sensor and hose
- If water remains after clearing accessible blockages
- If drain pump makes unusual noises or does not run when expected
- If internal fault indications or additional error codes arise
Next step
Choose the next step for F07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Miele 6102010 |
| voltage_rating | 230V AC |
Common Questions
What does F07 error mean on Miele washing machine?
F07 indicates a drainage failure, often resulting in water remaining in the drum and the machine stopping mid-cycle.
Can I fix Miele washing machine F07 error myself?
Yes, you can check and clear blockages by cleaning the drain filter and inspecting the drain hose.
How much does it cost to fix F07 error?
The estimated cost to fix the F07 error ranges from $100 to $300, depending on parts and labor in your area.
When should I call a technician for F07?
Call a technician if water remains after clearing blockages, if the drain pump makes unusual noises, or if additional error codes appear.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!