Maytag Dishwasher Error PF

⚡ Quick Answer: The Maytag dishwasher PF error code signifies a power failure, indicating that the unit has experienced a power interruption during its operation. Thi... ✅ DIY Fixable

What Does Error PF Mean?

The Maytag dishwasher PF error code signifies a power failure, indicating that the unit has experienced a power interruption during its operation. This may cause the dishwasher to stop mid-cycle, display the PF code on the control panel, and not resume its previous cycle until reset. Common causes include temporary power interruptions or loose electrical connections.

Common Symptoms:

  • Dishwasher stops mid‑cycle
  • PF displayed on control panel
  • Dishwasher does not resume previous cycle until reset

Possible Causes

  • Temporary power interruption to dishwasher (medium)
  • Loose or improper electrical connection (low)

How to Fix Error PF

DIY Fix Clear the PF Error and Restart Dishwasher

  1. Press the Cancel or Drain button to clear the PF code if available.
  2. Power‑cycle the dishwasher by unplugging it or turning off the dedicated circuit breaker for at least 1 minute.
  3. Restore power and select a wash cycle, then press Start.

Technician Only Inspect Power and Connections

  1. Turn off power at the breaker and verify proper wiring and connections at the dishwasher junction box.
  2. Check outlet (if applicable) or wiring for loose connections, damaged cable, or signs of overheating.
  3. Test circuit breaker and electrical supply stability.
  4. Restore power and verify dishwasher operation and whether PF code returns.

Parts needed: Power cord or hard‑wire wiring, Terminal block connectors

🛑 When to Call a Pro:
  • PF error returns repeatedly after resets and basic checks
  • Signs of electrical issues such as tripped breakers, burning smell, or intermittent power

Technical Specifications

wattage 1200W
component Control Board
resistance 10-20 ohms
part_number W10404050
voltage_rating 120V AC

Common Questions

What does PF error mean on Maytag dishwasher?

The PF error indicates a power failure, causing the dishwasher to stop mid-cycle and display the error code.

Can I fix Maytag dishwasher PF error myself?

Yes, you can try clearing the PF error by pressing the Cancel button and power-cycling the dishwasher.

How much does it cost to fix PF error?

The estimated repair cost for the PF error ranges from $50 to $150.

When should I call a technician for PF?

Call a technician if the PF error returns after resets or if you notice electrical issues like tripped breakers or a burning smell.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!