Maytag Dishwasher: leaking

Professional Repair Guide

What is this symptom?

Experiencing a leak from your Maytag dishwasher? Water may escape during operation or when idle, often seen at the base of the door or around hoses. This issue can stem from a worn door gasket or a faulty water inlet valve. Addressing this promptly can prevent further damage to your kitchen.

Urgency: Medium

Important Tips for Maytag Models

  • Maytag manuals specifically list water line damage, clogged filters, and incorrect drain hose installation as common leak sources.

Possible Causes

Worn or damaged door gasket or door seal

How to Identify: Inspect gasket for cracks, tears, or gaps; a quick check can use a piece of paper around the perimeter—if it slips out easily, the seal may be compromised.

Part: Door gasket / seal

Faulty water inlet valve

How to Identify: If dishwasher continually fills or overfills with water, causing leaks, the inlet valve may be stuck open or cracked.

Part: Water inlet valve

DIY Solutions

Clean and Inspect Door Gasket

Moderate 15-30 minutes
Tools Needed: clean cloth, mild detergent
  1. Open dishwasher and wipe entire gasket with a damp cloth to remove debris.
  2. Visually inspect gasket for cracks, tears, or deformation.
  3. If minor buildup is found, clean thoroughly. If gaps or tears are present, plan replacement.
⚠️ Safety First: Ensure dishwasher is off when inspecting but no electrical disconnection needed for gasket inspection.

Check and Tighten Hoses

Moderate 20-40 minutes
Tools Needed: screwdriver, adjustable wrench, towel
  1. Turn off water supply and power to dishwasher.
  2. Pull dishwasher forward and locate drain and supply hoses.
  3. Tighten hose clamps and inspect for cracks; replace hoses if visibly damaged.
  4. Reconnect and test for leaks by running a short cycle.
⚠️ Safety First: Turn off water and electrical supply to prevent damage or shock.

Remove Drain Clogs

Moderate 30 minutes
Tools Needed: bucket, gloves, plumbing snake or coat hanger
  1. Inspect and clean the drain filter and sump area.
  2. Under the sink, disconnect the drain hose and clear clogs.
  3. Reattach hose ensuring proper routing to prevent backflow.
⚠️ Safety First: Be careful of sharp metal edges; wear gloves.

Professional Repairs

Replace Door Gasket or Seal

Estimated Cost: $30 - $100 for part; $100 - $250 including labor

Replace Water Inlet Valve

Estimated Cost: $20 - $60 for part; $120 - $300 with labor

Replace Damaged Wash Arm

Estimated Cost: $15 - $50 for part; $100 - $200 with labor

When to Call a Professional

> Leak persists after checking seals and hoses
Visible damage to internal components such as pump, valves, or spray arms
Leaks originate from beneath the dishwasher and not from simple hose or gasket issues

Preventive Maintenance

  • Clean door gasket and seals: Leaks due to debris buildup and gasket deterioration
    Frequency: monthly
  • Clean filters and check drain hose: Clog-related leaks and backups
    Frequency: monthly

Frequently Asked Questions

Why is my Maytag Dishwasher leaking?
Your Maytag dishwasher may leak due to a worn door gasket or a faulty water inlet valve.
How do I fix Maytag Dishwasher leaking myself?
To fix it, clean the door gasket, check hose connections, and remove any drain clogs.
How much does it cost to fix leaking?
Repair costs range from $100 to $300, depending on whether you need to replace the gasket or inlet valve.
When should I call a technician for leaking?
Call a technician if the leak persists after DIY fixes or if you suspect a more complex issue.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

82%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Door gasket failure (3 mentions)
  • Improper leveling of the dishwasher (1 mentions)
  • Faulty seals or gaskets in the door (1 mentions)
  • Issues with float and switch assembly (1 mentions)

User Suggested Solutions

  1. Replace door gasket

    Success rate: 20.0%
  2. Check and adjust dishwasher leveling

    Success rate: 7.0%
  3. Replace inner door gasket

    Success rate: 7.0%
  4. Clean float and check for soap suds

    Success rate: 7.0%
  5. Contact Maytag for potential recall

    Success rate: 7.0%

Community Discussions

Dishwasher leaks a steady drip above where the supply line connections to it.

Replace the valve that costs $45.

leaking water from the back

Contact Maytag for potential recall and replacement of faulty heater bushings.

leaking from the underside / bottom corners of the door

A $13 replacement door gasket is available as an alternative to the official part.

Leaking underneath

Clean the rubber gasket and reassemble the float and switch assembly.

leaking

Replaced door gasket to fix the leak.

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!