Maytag Dishwasher Error F2
⚡ Quick Answer: The Maytag dishwasher F2 error indicates a malfunction in the drain pump, often resulting in the dishwasher stopping mid-cycle and displaying the erro... ✅ DIY Fixable
What Does Error F2 Mean?
The Maytag dishwasher F2 error indicates a malfunction in the drain pump, often resulting in the dishwasher stopping mid-cycle and displaying the error. Symptoms include standing water at the bottom of the unit and a flashing rinse light. This issue is typically caused by a drainage blockage or restriction. To resolve it, check and clean the dishwasher filter and sump area, and inspect the drain hose for any kinks or blockages.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays F2 error
- Standing water remains at bottom of dishwasher
- Rinse light may flash with the error
Possible Causes
- Drainage blockage or restriction (medium)
How to Fix Error F2
DIY Fix Basic Drainage Troubleshooting
- Disconnect power to the dishwasher.
- Check and clean the dishwasher filter and sump area of debris.
- Inspect the drain hose for kinks, bends, or blockages and straighten/clear as needed.
- Ensure the float switch inside the tub moves freely and is not stuck.
Technician Only Inspect and Test Drain Components
- Verify continuity and operation of the drain pump using a multimeter.
- Replace the drain pump if it shows no operation or internal damage.
- Check float switch electrical operation and replace if faulty.
- Examine wiring connections to these components for corrosion or damage.
Parts needed: drain pump, float switch, drain hose
- After attempting basic troubleshooting if the error persists
- If there is standing water and suspected pump failure
- If the control panel displays multiple error codes simultaneously
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10878945 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on Maytag dishwasher?
F2 error indicates a drain pump malfunction, causing mid-cycle stops and standing water.
Can I fix Maytag dishwasher F2 error myself?
Yes, you can try cleaning the filter and checking the drain hose for blockages.
How much does it cost to fix F2 error?
The estimated repair cost ranges from $50 to $250, depending on parts and labor.
When should I call a technician for F2?
Call a technician if the error persists after troubleshooting or if there is suspected pump failure.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!