Maytag Dishwasher Error F6

⚡ Quick Answer: The Maytag dishwasher error F6 indicates a drainage failure, often linked to potential turbidity sensor faults. This error may cause unusual sounds fr... ✅ DIY Fixable

What Does Error F6 Mean?

The Maytag dishwasher error F6 indicates a drainage failure, often linked to potential turbidity sensor faults. This error may cause unusual sounds from the pump and water pooling at the bottom of the unit. To address this, begin by cleaning filters and spray arms to minimize false sensor readings. If the problem persists, further diagnosis may be required to check the sensor circuitry.

Common Symptoms:

  • Dishwasher displays F6 code during or after cycle (no clear official symptom definition available)
  • Possible association with sensing/communication issues based on community repair sites

Possible Causes

  • Potential turbidity sensor fault (community guide claim) (low)

How to Fix Error F6

DIY Fix Check for basic sensing faults

  1. Clear and clean filters and spray arms to reduce false sensor readings
  2. Ensure dishwasher interior and sensors (if visible) are free of debris
  3. Perform a power reset of the dishwasher by turning off power at the circuit breaker for several minutes

Technician Only Diagnose turbidity / sensor circuitry

  1. Access and test turbidity or water quality sensor (if present) with appropriate diagnostic tools
  2. Check wiring harness and connectors for damage or poor connection
  3. Replace faulty sensor component or associated harness if verified defective

Parts needed: Turbidity / water cleanliness sensor, Wiring harness (related)

🛑 When to Call a Pro:
  • If F6 persists after basic cleaning and reset
  • If your model’s service manual/diagnostic mode suggests a specific sensor fault
  • If there is electrical smell, smoke, or other signs of component failure

Technical Specifications

wattage 40W
component Drain Pump
resistance 10-30 ohms
part_number W10876543
voltage_rating 120V AC

Common Questions

What does F6 error mean on Maytag dishwasher?

F6 indicates a drainage failure, potentially related to turbidity sensor issues.

Can I fix Maytag dishwasher F6 error myself?

Yes, you can clean filters and spray arms and perform a power reset.

How much does it cost to fix F6 error?

Estimated repair costs range from ¥5,000 to ¥25,000, depending on the sensor and labor.

When should I call a technician for F6?

Call a technician if F6 persists after cleaning and reset or if there are signs of electrical failure.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!