Maytag Dishwasher Error F9

⚡ Quick Answer: The Maytag dishwasher F9 error signifies a drain pump failure or drainage issue. This error often results in the dishwasher stopping mid-cycle with wa... ✅ DIY Fixable

What Does Error F9 Mean?

The Maytag dishwasher F9 error signifies a drain pump failure or drainage issue. This error often results in the dishwasher stopping mid-cycle with water remaining in the tub, accompanied by flashing F9 lights. The primary causes include a clogged drain system, a kinked drain hose, or a faulty drain pump. Addressing these issues promptly ensures your dishwasher can complete its wash cycles efficiently.

Common Symptoms:

  • Dishwasher stops mid‑cycle with water remaining in tub
  • Flashing F9 (or E1 F9) error lights
  • Dishwasher won’t complete wash cycle
  • Standing water at cycle end

Possible Causes

  • Clogged or obstructed drain system (hose, filter, garbage disposer connection) (medium)
  • Kinked or improperly installed drain hose (medium)
  • Faulty or jammed drain pump (medium)

How to Fix Error F9

DIY Fix Check and clear drain blockages

  1. Turn off power to the dishwasher.
  2. Remove bottom rack and clean the filter and sump of debris.
  3. Inspect and clear the drain hose and garbage disposer connection of food particles or blockages.
  4. Ensure drain hose is free of kinks and correctly routed.
  5. Restore power and run a short drain cycle to verify resolution.

DIY Fix Reset dishwasher control

  1. Turn off the dishwasher.
  2. Unplug the unit or switch off its circuit breaker for at least 30 seconds.
  3. Restore power and start a new cycle to clear temporary glitches.

Technician Only Test/replace drain pump

  1. Disconnect power and access the drain pump.
  2. Inspect the pump impeller and housing for debris or damage.
  3. Test pump electrical continuity with a multimeter.
  4. Replace the drain pump assembly if faulty.
  5. Reassemble and test dishwasher drainage.

Parts needed: Drain pump assembly, Associated gaskets/hardware

🛑 When to Call a Pro:
  • After drainage and filter checks, error persists
  • Drain pump replacement does not resolve the error
  • Signs of electrical damage (burnt wiring, control board faults)

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-20 ohms
part_number W10712395
voltage_rating 120V AC

Common Questions

What does F9 error mean on Maytag dishwasher?

The F9 error indicates a drain pump failure, causing the dishwasher to stop mid-cycle with standing water.

Can I fix Maytag dishwasher F9 error myself?

Yes, check for drain blockages, clear the filter, and reset the dishwasher to resolve the issue.

How much does it cost to fix F9 error?

Repair costs range from $80 to $250, including parts and labor.

When should I call a technician for F9?

Call a technician if the error persists after checking the drain and filter, or if you see signs of electrical damage.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!